Yamaha SXV60K Owner'S Manual Download Page 32 | Manualshive

Page: 32 / 94

background image

5-14

ESU00053

V-belt holders

Keep a spare V-belt for emergency use by placing it into
the V-belt holders provided.

CAUTION:

@

Make sure that the V-belt is installed securely in the
holders.

@

ESU00056

Spark plug holders

Keep spare spark plugs for emergency use by placing
them into the spark plug holders provided.

ESU04080

Carburetor coolant shut-off lever

The carburetor coolant shut-off lever controls the flow of
coolant through the carburetor.
Make sure that the lever is in the “ON” position to allow
the coolant to flow and warm the carburetor while the
ambient temperature is below 0 °C (32 °F).

1

Carburetor coolant shut-off lever

2

“ON” (open)

3

“OFF” (closed)

CAUTION:

@

When operating the snowmobile in temperatures
above 0 °C (32 °F), move the carburetor coolant shut-
off lever to the “OFF” position to stop the flow of
coolant, since the carburetor does not need to be
warmed.

@

U8EX11.book Page 14 Thursday, May 13, 2004 10:56 AM

«
...
30
31
32
33
34
...
»

Summary of Contents for SXV60K































































































Reviews:

No comments

Related manuals for SXV60K

Brand: Yamaha Pages: 98

Brand: Yamaha Pages: 191

Wagon with tilt

Brand: Texas Pages: 42

Brand: Prophete Pages: 116

Brand: pronovost Pages: 28

Brand: PRONAR Pages: 138

Brand: Can-Am Pages: 58

Brand: Austin Motor Company Pages: 124

Brand: TSE Pages: 472

Brand: Fort Pages: 88

600 INDY Voyager 2014

Brand: Polaris Pages: 132

600 INDY SP 2019

Brand: Polaris Pages: 178

Brand: Landoll Pages: 72

Brand: Kayo Pages: 33

Brand: Rato Pages: 118

Brand: Taylor-Dunn Pages: 206

Brand: Can-Am Pages: 136

GRIZZLY YFM70GPXH

Brand: Yamaha Pages: 174

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands