background image

SWP1 Owner’s Manual

2

The above warning is located on the top of the unit.
L’avertissement ci-dessus est situé sur le dessus de l’unité.

Explanation of Graphical Symbols
Explication des symboles

The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “danger-
ous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

L’éclair avec une flèche à l’intérieur d’un triangle équilatéral est destiné à attirer l’attention de l’utilisateur sur la présence d’une « tension 
dangereuse » non isolée à l’intérieur de l’appareil, pouvant être suffisamment élevée pour constituer un risque d’électrocution.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (ser-
vicing) instructions in the literature accompanying the product.

Le point d’exclamation à l’intérieur d’un triangle équilatéral est destiné à attirer l’attention de l’utilisateur sur la présence d’instructions 
importantes sur l’emploi ou la maintenance (réparation) de l’appareil dans la documentation fournie.

IMPORTANT SAFETY 
INSTRUCTIONS

1

Read these instructions.

2

Keep these instructions.

3

Heed all warnings.

4

Follow all instructions.

5

Do not use this apparatus near water.

6

Clean only with dry cloth.

7

Do not block any ventilation openings. Install in accordance with the 
manufacturer’s instructions.

8

Do not install near any heat sources such as radiators, heat registers, 
stoves, or other apparatus (including amplifiers) that produce heat.

9

Do not defeat the safety purpose of the polarized or grounding-type 
plug. A polarized plug has two blades with one wider than the other. A 
grounding type plug has two blades and a third grounding prong. The 
wide blade or the third prong are provided for your safety. If the pro-
vided plug does not fit into your outlet, consult an electrician for 
replacement of the obsolete outlet.

10 Protect the power cord from being walked on or pinched particularly 

at plugs, convenience receptacles, and the point where they exit from 
the apparatus.

11 Only use attachments/accessories specified by the manufacturer.
12 Use only with the cart, stand, tripod, bracket, or 

table specified by the manufacturer, or sold with 
the apparatus. When a cart is used, use caution 
when moving the cart/apparatus combination to 
avoid injury from tip-over.

13 Unplug this apparatus during lightning storms 

or when unused for long periods of time.

14 Refer all servicing to qualified service personnel. Servicing is 

required when the apparatus has been damaged in any way, such as 
power-supply cord or plug is damaged, liquid has been spilled or 
objects have fallen into the apparatus, the apparatus has been 
exposed to rain or moisture, does not operate normally, or has been 
dropped.

15 [EXT DC INPUT] Connector is intended to be supplied by UL Listed 

Power Supply marked “Limited Power Source”, “LPS” or “Class 2” 
and rated 24 Vdc.

PRÉCAUTIONS CONCER-
NANT LA SÉCURITÉ

1

Lire ces instructions.

2

Conserver ces instructions.

3

Tenir compte de tous les avertissements.

4

Suivre toutes les instructions.

5

Ne pas utiliser ce produit à proximité d’eau.

6

Nettoyer uniquement avec un chiffon propre et sec.

7

Ne pas bloquer les orifices de ventilation. Installer l’appareil conformément 
aux instructions du fabricant.

8

Ne pas installer l’appareil à proximité d’une source de chaleur comme un 
radiateur, une bouche de chaleur, un poêle ou tout autre appareil (y compris 
un amplificateur) produisant de la chaleur.

9

Ne pas modifier le système de sécurité de la fiche polarisée ou de la fiche de 
terre. Une fiche polarisée dispose de deux broches dont une est plus large 
que l’autre. Une fiche de terre dispose de deux broches et d’une troisième 
pour le raccordement à la terre. Cette broche plus large ou cette troisième 
broche est destinée à assurer la sécurité de l’utilisateur. Si la fiche équipant 
l’appareil n’est pas compatible avec les prises de courant disponibles, faire 
remplacer les prises par un électricien.

10 Acheminer les cordons d’alimentation de sorte qu’ils ne soient pas piétinés 

ni coincés, en faisant tout spécialement attention aux fiches, prises de cou-
rant et au point de sortie de l’appareil.

11 Utiliser exclusivement les fixations et accessoires spécifiés par le fabricant.
12 Utiliser exclusivement le chariot, le stand, le trépied, 

le support ou la table recommandés par le fabricant 
ou vendus avec cet appareil. Si l’appareil est posé 
sur un chariot, déplacer le chariot avec précaution 
pour éviter tout risque de chute et de blessure.

13 Débrancher l’appareil en cas d’orage ou lorsqu’il doit 

rester hors service pendant une période prolongée.

14 Confier toute réparation à un personnel qualifié. Faire réparer l’appareil s’il a 

subi tout dommage, par exemple si la fiche ou le cordon d’alimentation est 
endommagé, si du liquide a coulé ou des objets sont tombés à l’intérieur de 
l’appareil, si l’appareil a été exposé à la pluie ou à de l’humidité, si l’appareil 
ne fonctionne pas normalement ou est tombé.

15 Le connecteur [EXT DC INPUT] (Entrée CC extérieure) est conçu pour être ali-

menté par une source d'alimentation à courant continu répertoriée UL, mar-
quée « LPS » à puissance régulée ou de « Classe 2 » et d'une puissance de 
24 V cc.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT 
EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

AVERTISSEMENT

POUR RÉDUIRE LES RISQUES D’INCENDIE OU DE DÉCHARGE 
ÉLECTRIQUE, N’EXPOSEZ PAS CET APPAREIL À LA PLUIE OU À 
L’HUMIDITÉ.

Summary of Contents for SWP1-16MMF




















Reviews: