9
English
1
POWER indicator
Lights in green when the POWER switch is turned ON,
and goes off when turned OFF.
* STANDBY mode:
If the AUTO POWER ON/OFF switch on the rear panel
is set to ON, this indicator lights in red when no signal
is input to this unit.
2
AUTO POWER ON/OFF switch
By setting this switch to the ON position, this unit’s
automatic power ON/OFF function operates as described
below. If you do not need this function, set to the OFF
position.
* Make sure to change the setting of this switch only when
the power of this unit is off.
Automatic power ON/OFF function
When you play a source, the power to this unit turns on
automatically by sensing audio signals input to this unit.
The power turns off automatically if the source being
played is stopped or the input signal is cut off for several
minutes.
* This function will operate responding to a certain level of
input signal. Increase the output level on the input
source if the automatic power ON function will not
operate, or decrease the level if the automatic power
OFF function will not operate.
* There may be a case that the power turns on
unexpectedly by sensing noise from other appliances. If
it occurs, set the AUTO POWER ON/OFF switch to the
OFF position.
This function is available only when the power of this
unit is on (by setting the POWER switch (
4
) to “on”).
3
INPUT1 (FROM AMPLIFIER) terminals
Used to connect this unit with the speaker terminals of the
amplifier.
4
POWER switch
Turns the power of this unit ON and OFF whenever
pressed. When this switch is turned ON, the POWER
indicator above the POWER switch lights up.
5
HIGH CUT control
Adjusts the high frequency cut off point.
Frequencies higher than the frequency selected by this
control are all cut off (and not output).
* One graduation of this control represents 10 Hz.
6
VOLUME control
Adjusts the volume level.
7
INPUT2 terminals
Used to input line level signals from the amplifier.
8
OUTPUT (TO SPEAKERS) terminals
Can be used for connections with the main speakers.
These terminals send signals output from the amplifier to
the main speakers directly.
CONTROLS AND THEIR FUNCTIONS
INPUT1
INPUT2
FROM AMPLIFIER
OUTPUT
TO SPEAKERS
ON OFF
AUTO
POWER
POWER
HIGH CUT
STANDBY-RED
ON-GREEN
VOLUME
I50 Hz
0
I0
50 Hz
OFF
ON
INPUT1
INPUT2
FROM AMPLIFIER
OUTPUT
TO SPEAKERS
OFF
AUTO
POWER
POWER
HIGH CUT
STANDBY-RED
ON-GREEN
VOLUME
I50 Hz
0
I0
50 Hz
ON
1
3
2
6
7
8
5
4
OFF
ON
I50 Hz
50 Hz
60
70
80
90
I00
II0
I20
I30
I40