Features and functions
22
EJU31020
Operation of controls and other
functions
EJU31050
Hood
The hood is secured at the rear by a latch.
Lift the steering pole and support it with the
lock pin before removing the hood.
To remove the hood:
(1) Turn the latch knob to the open position,
and then pull up on the hood latch to un-
latch the hood.
(2) Grasp the hood using the handgrips pro-
vided at the front and rear of the hood. Lift
the hood up and to the rear to remove it.
To install the hood:
(1) Position the hood on the deck so that the
two projections at the front of the hood fit
under the two stays on the deck.
(2) Push down on the hood latch, and then
turn the knob to the lock position.
1
Hood latch knob
2
Hood latch
1
Handgrip
UF1N15E0.book Page 22 Thursday, May 18, 2006 10:47 AM
Summary of Contents for SUPERJET 2007
