INSTRUMENT AND CONTROL FUNCTIONS
4-15
4
To close a sidebag lid
1. Fold the sidebag lid down so that
the latch snaps into place.
2. Turn the key clockwise, and then
remove it.
TIP
Water can be harmful to untreated
leather. Use Yamaha Saddle Soap or
another quality brand according to the
manufacturer’s directions to clean the
leather on the sidebags. Polish the dry
leather with a soft cloth, and then treat
with Yamaha Mink Oil or another high-
quality leather protectant for increased
water resistance.
EAU42546
Adjusting the shock absorber
assembly
This shock absorber assembly is
equipped with a spring preload adjust-
ing ring, allowing the spring preload to
be adjusted to suit the rider’s prefer-
ence.
It is recommended to have a Yamaha
dealer adjust the spring preload.
Should you choose to make the adjust-
ment, use the special wrench included
in the additional tool kit, which was
handed out separately at the purchase
of the vehicle.
NOTICE
ECA10101
To avoid damaging the mechanism,
do not attempt to turn beyond the
maximum or minimum settings.
Adjust the spring preload as follows.
To increase the spring preload and
thereby harden the suspension, turn
the adjusting ring in direction (a). To de-
crease the spring preload and thereby
soften the suspension, turn the adjust-
ing ring in direction (b).
TIP
Align the appropriate notch in the ad-
justing ring with the position indicator
on the shock absorber.
1. Shock absorber assembly
2. Position indicator
3. Spring preload adjusting ring
Spring preload setting:
Minimum (soft):
1
Standard:
4
Maximum (hard):
9
2
3
U5S616E0.book Page 15 Wednesday, July 25, 2012 8:13 AM
