PERIODIC MAINTENANCE AND ADJUSTMENT
7-33
7
EAU24133
Replacing the tail/brake light
bulb
1. Remove the tail/brake light lens by
removing the screws.
2. Remove the burnt-out bulb by
pushing it in and turning it counter-
clockwise.
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screws.
NOTICE:
Do not over-
tighten the screws, otherwise
the lens may break.
[ECA10681]
EAU42462
Replacing a front turn signal
light bulb
1. Remove the front turn signal light
outer lens by removing the screws.
2. Remove the inner lens by pulling it
out.
3. Remove the burnt-out bulb by
pushing it in and turning it counter-
clockwise.
4. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
5. Place the inner lens in the original
position, and then install the outer
lens by installing the screws.
NOTICE:
Do not overtighten the
screws, otherwise the lens may
break.
[ECA10681]
1. Screw
1. Screw
1. Inner lens
U5S616E0.book Page 33 Wednesday, July 25, 2012 8:13 AM
