Yamaha Star XVS1100C Owner'S Manual Download Page 59 | Manualshive

Page: 59 / 99

background image

PERIODIC MAINTENANCE AND MINOR REPAIR

6-16

6

and check the condition and pres-
sure of your tires. NEVER OVER-
LOAD YOUR VEHICLE. Make sure
that the total weight of the cargo, rid-
er, passenger, and accessories
(cowling, saddlebags, etc. if ap-
proved for this model) does not ex-
ceed the maximum load of the
vehicle. Operation of an overloaded
vehicle could cause tire damage, an
accident, or even injury.

Tire inspection

Always check the tires before operating
the motorcycle. If a tire tread shows
crosswise lines (minimum tread depth),

if the tire has a nail or glass fragments
in it, or if the sidewall is cracked, con-
tact a Yamaha dealer immediately and
have the tire replaced.

WARNING

EWA10560

●

It is dangerous to ride with a
worn-out tire. When a tire tread
begins to show crosswise lines,
have a Yamaha dealer replace
the tire immediately.

●

The replacement of all wheel-
and brake-related parts, includ-
ing the tires, should be left to a
Yamaha dealer, who has the
necessary professional knowl-
edge and experience.

●

It is not recommended to patch
a punctured tube. If unavoid-
able, however, patch the tube
very carefully and replace it as
soon as possible with a high-
quality product.

Tire information

This motorcycle is equipped with spoke
wheels and tube tires.

WARNING

EWA10460

●

The front and rear tires should
be of the same make and de-
sign, otherwise the handling
characteristics of the vehicle
cannot be guaranteed.

●

After extensive tests, only the
tires listed below have been ap-
proved for this model by
Yamaha Motor Co., Ltd.

1. Tire sidewall

2. Tire wear indicator

3. Tire tread depth

Minimum tire tread depth (front and
rear):

1.0 mm (0.04 in)

Front tire:

Size:

110/90-18M/C 61S

Manufacturer/model:

DUNLOP/K555F
BRIDGESTONE/EXEDRA L309

Rear tire:

Size:

170/80-15M/C 77S

Manufacturer/model:

DUNLOP/K555
BRIDGESTONE/EXEDRA G546G

5YS10.book Page 16 Wednesday, May 14, 2003 6:32 PM

«
...
57
58
59
60
61
...
»

Summary of Contents for Star XVS1100C




































































































Reviews:

No comments

Related manuals for Star XVS1100C

Brand: Cake Pages: 13

Brand: Saddlemen Pages: 3

Brand: VEB Pages: 63

Brand: W&W Cycles Pages: 5

Brand: Denali Pages: 2

Brand: N-Com Pages: 32

DARK SMOKE SPORT

Brand: Malossi Pages: 4

Brand: hepco & becker Pages: 4

2007 PAMPERA 125

Brand: GAS GAS Pages: 58

Brand: Yamaha Pages: 15

Brand: Yamaha Pages: 84

Brand: Yamasaki Pages: 28

Brand: Yamaha Pages: 34

Brand: Yamaha Pages: 34

Brand: Yamaha Pages: 53

Brand: Yamaha Pages: 90

Brand: Yamaha Pages: 102

Brand: Yamaha Pages: 102

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands