PERIODIC MAINTENANCE AND MINOR REPAIR
6-23
6
EAU01106*
Drive chain lubrication
The chain consists of many parts which
work with each other. If the chain is not
maintained properly, it will wear out
quickly. Therefore, the chain must be
serviced regularly. This service is es-
pecially necessary when riding in dusty
areas.
The drive chain should be lubricated
every 500 km. First, remove all dirt and
mud from the chain with a brush or
cloth. Then, spray any of the many
brands of spray-type chain lubricant
between both rows of side plates and
on all center rollers.
To clean the chain thoroughly, remove
it from the motorcycle, dip it in solvent,
and clean out as much dirt as possible.
Then, take the chain out of the solvent
to dry it, and immediately lubricate it to
prevent it from rusting.
EAU02962
Cable inspection and
lubrication
EW000112
WARNING
@
Damage to the outer housing of ca-
bles may lead to internal rusting and
interfere with the cable movement.
Replace damaged cables as soon as
possible to prevent unsafe condi-
tions.
@
Lubricate the cables and cable ends. If
a cable does not operate smoothly, ask
a Yamaha dealer to replace it.
EAU00773
Throttle cable and grip
lubrication
The throttle twist grip assembly should
be greased at the time that the cable is
lubricated, since the grip must be re-
moved to get at the end of the throttle
cable. After removing the screws, hold
the end of the cable up in the air and
put in several drops of lubricant. With
the throttle grip disassembled, coat the
metal surface of the grip assembly with
a suitable all-purpose grease.
Recommended lubricant:
Engine oil
E_3mw.book Page 23 Monday, February 5, 2001 9:54 AM
