1
En
GJ
English
Fr
anç
a
is
Deuts
c
h
Español
SPEAKER STAND
SPS-900
Thank you for selecting this Yamaha product. Be sure to read this instruction thoroughly before using this stand. After you
have read this instruction, keep it in a safe place for future reference.
■
DIMENSION FIGURES
■
SPECIFICATIONS
Dimensions (W x H x D):
360.3 x 603 x 415.3 mm
(14-3/16” x 23-3/4” x 16-3/8”)
Weight/unit:
6.5 kg (14 lbs. 5 oz.)
■
USABLE SPEAKERS
•
Soavo-2
Use the front and the rear screw holes in the bottom of the
speaker to fix the speaker.
•
Soavo-900M
Use the front screw hole in the bottom of the speaker to fix
the speaker.
PRECAUTIONS
•
This speaker stand is only for the speaker systems listed in “USABLE SPEAKERS” below. Do not use the speakers
other than these listed.
•
To prevent the speaker from falling, use the screws and parts provided with the stand.
•
To prevent the speaker stand from falling over, select a location which is flat and stable.
•
To avoid accidents resulting from tripping over loose speaker cables and to prevent the speaker stand from falling over,
fix the speaker cables to the wall, etc.
•
Do not let the children lean or sit on the stand as this might cause the serious accidents resulting from the falling over of
the speaker stand.
•
To prevent the speaker stand from discoloring and warping, keep the speaker stand away from the stoves and places
where it will be exposed to direct sunlight, etc.
•
Do not attempt to clean the speaker stand with chemical solvents as this might damage the finish. Use a clean, dry
cloth.
•
When moving the speaker and stand, be sure to hold the support detached from the speaker.
•
Secure placement or installation is the owner’s responsibility. Yamaha shall not be liable for any accident caused by
improper placement or installation of speakers.
415.3 (16-3/8)
175
(6-7/8)
77
(3-1/16)
49
(1-15/16)
37.5
(1-1/2)
48.5
(1-15/16)
360.3 (14-3/16)
180 (7-1/16)
73.2
(2-7/8)
320.3 (12-5/8)
572 (22-1/2)
4
(3/16)
603 (23-3/4)
25
(1)
2
(1/16)
15
(9/16)
Front view
unit: mm (inch)
Top view
ASSEMBLY
INSTRUCTION
