Yamaha SP2060 Owner'S Manual Download Page 3 | Manualshive

Page: 3 / 57

background image

The above warning is located on the top of the unit.

Explanation of Graphical Symbols

The lightning flash with arrowhead symbol
within an equilateral triangle is intended to alert
the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.

The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the product.

IMPORTANT SAFETY INSTRUCTIONS

1

Read these instructions.

2

Keep these instructions.

3

Heed all warnings.

4

Follow all instructions.

5

Do not use this apparatus near water.

6

Clean only with dry cloth.

7

Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.

8

Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.

9

Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.

10

Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.

11

Only use attachments/accessories specified by the
manufacturer.

12

Use only with the cart, stand,
tripod, bracket, or table specified
by the manufacturer, or sold with
the apparatus. When a cart is
used, use caution when moving
the cart/apparatus combination
to avoid injury from tip-over.

13

Unplug this apparatus during
lightning storms or when unused for long periods of
time.

14

Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug
is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally,
or has been dropped.

(98-6500)

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

C A U T I O N

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA.

(Perchlorate)

This product contains a battery that contains perchlorate material.

Perchlorate Material—special handling may apply,

See www.dtsc.ca.gov/hazardouswaste/perchlorate.

«
1
2
3
4
5
...
»

Summary of Contents for SP2060


























































Reviews:

No comments

Related manuals for SP2060

Brand: Panasonic Pages: 4

Brand: YASKAWA Pages: 34

Brand: ebm-papst Pages: 11

Brand: YASKAWA Pages: 15

Brand: DAD Pages: 16

Brand: Addonics Technologies Pages: 1

Aquaduct 360 XT

Brand: Aqua Computer Pages: 28

ELC-LTTR240-TBP

Brand: ENERMAX Pages: 16

Brand: Aaeon Pages: 61

Brand: ZiLOG Pages: 11

Brand: Rockwell Automation Pages: 21

MP5S Plus Writer

Brand: SONIX Pages: 23

Brand: Dantel Pages: 22

Brand: PairGain Pages: 48

Brand: VANTAS Pages: 30

Brand: Goobay Pages: 28

Brand: Datavideo Pages: 71

Linktropy MINI-G

Brand: Apposite Technologies Pages: 57

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands