Yamaha Sirius T110LE, Service Manual

Page: 270 / 308

ELEC
CHECKING THE BULBS AND BULB SOCKETS
7-9
CHECKING THE CONDITION OF THE
BULB SOCKETS
The following procedure applies to all of the
bulb sockets.
1. Check:
9
bulb socket (for continuity)
(with the pocket tester)
No continuity
→
Replace.
NOTE:
Check each bulb socket for continuity in the
same manner as described in the bulb section;
however, note the following.
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. Install a good bulb into the bulb socket.
b. Connect the pocket tester probes to the
respective leads of the bulb socket.
c. Check the bulb socket for continuity. If any
of the readings indicate no continuity,
replace the bulb socket.
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
Pocket tester
90890-03112
3S3-F8197-E0_7 05.11.3 9:06 Page 9