background image

15

Specifications

Neck

Mahogany

Body

Maple

Fingerboard

Rosewood (SLG-120NW : Ebony)

Bridge

Rosewood

Frame Unit

Maple (SLG-120NW : Rosewood/Maple)

Strings

Nylon Guitar Strings

Sensors

B-BAND

Connectors/Controls

• AUX IN

• AUX IN Level Control

• LINE OUT jack (monaural)

• PHONES jack (stereo)

• Volume

• BASS control

• TREBLE control

• REVERB switch (OFF/1/2)

• PHONES switch (ON/OFF)

• LINE OUT Jack with POWER Switch (Inserting a plug into the

jack switches the power on)

Power Supply

AC Adaptor/6LR61 battery x1 dual power source

 * Recommended AC Adaptors: PA-D09, PA-1E, PA-3C

Battery Life

Continuous Use

• Using Alkaline battery : approximately 24 hours

• Using Manganese battery : approximately 13.5 hours

With the reverb activated

• Using Alkaline battery : approximately 7.5 hours

• Using Manganese battery : approximately 2.0 – 0.5 hours (de-

pending upon the manufacturer)

String Length

650 mm (25-9/16”)

Dimensions 

(with the left frame attached and to the end of the strap pin)

965 (L) x 365 (W) x 80 (H) mm

38” (L) x 14-3/8” (W) x 3-1/8” (H)

Weight

approximately 1.8 kg (3 lbs. 15 oz.)

* Design and specifications are subject to change without notice.

02_slg100n_120nw_en.pm65

06.8.22, 11:21 AM

15

Summary of Contents for Silent Guitar SLG-120NW

















Reviews: