background image

8

Tuning

Use a tuning meter, pitch pipe, tuning fork, piano, etc., and tune the open strings to

the pitches shown below.

• If the string’s pitch is high, loosen the string until the string’s pitch is slightly lower than the tuning pitch,

then tune while raising the string’s pitch.

1F

2F

3F

4F

5F

1.

Play the 

standard pitch “lah” (A3: 440Hz) 

on a tuning fork, etc., and tune the 

open 5th string

 to the

same pitch.

2.

Play the pitch produced by pressing the 

5th string at the 5th fret

, and tune the 

open 4th string

 to the

same pitch.

3.

Play the pitch produced by pressing the 

4th string at the 5th fret

, and tune the 

open 3rd string

 to the

same pitch.

4.

Play the pitch produced by pressing the 

3rd string at the 4th fret

, and tune the 

open 2nd string

 to the

same pitch.

5.

Play the pitch produced by pressing the 

2nd string at the 5th fret

, and tune the 

open 1st string

 to the

same pitch.

6.

Play the pitch produced by pressing the 

6th string at the 5th fret

, and tune the pitch at the 5

th

 fret of the

6

th

 string to the pitch produced by the 

open 5

th

 string

.

Open 1

st

 String’s Pitch: E

Open 2

nd

 String’s Pitch: B

Open 3

rd

 String’s Pitch: G

Open 4

th

 String’s Pitch: D

Open 5

th

 String’s Pitch: A

Open 6

th

 String’s Pitch: E

Open 1

st

 String’s Pitch: E

Open 2

nd

 String’s Pitch: B

Open 3

rd

 String’s Pitch: G

Open 4

th

 String’s Pitch: D

Open 5

th

 String’s Pitch: A

Open 6

th

 String’s Pitch: E

02_slg100s_en.pm65

06.8.22, 11:05 AM

8

Summary of Contents for Silent Guitar SLG-100S
















Reviews:

Related manuals for Silent Guitar SLG-100S