SLG-100N
9
[VOLUME]
[BASS]
[TREBLE]
[F05]
[F06]
[16B]
[10]
Rotary knob
[F05]
Jack (LINE connector assembly)
AUX knob
Jack (LINE connector assembly)
Rotary knob
[VOLUME]
[BASS]
[TREBLE]
[16A]
[16A]
MA
AUX
Fig.4
[F05]: Bind Head Tapping Screw-1
3.0X10 ZMC2BL (20404200)
[F06]: Bind Head Tapping Screw-B
3.0X10 ZMC2BL (EP600140)
[10]: Hexagonal Nut
(AA820860)
[16B]: Bind Head Tapping Screw-B
3.0X10 ZMC2BL (EP600140)
Fig.3
[16A]: Bind Head Tapping Screw-B
3.0X10 ZMC2BL (EP600140)
Fig.5
[A]: Hexagonal Nut
Photo.1
Bridge saddle
Bridge
Pickup
Pickup
String
[A]
Jack holder
AUX
8.
PUP Circuit Board
(Time required: About 5 minutes)
8-1 Remove the panel assembly. (See procedure 6.)
8-2 Remove the four (4) screws marked [F02]. The panel holder
assembly can then be removed. (Fig.1)
8-3 Remove the PUP circuit board from the two (2) spacers. (Fig.1)
9.
Pickup
(Time required: About 5 minutes)
9-1 Remove the panel assembly. (See procedure 6.)
9-2 Turn each pegs and loosen the strings. (Fig.1, Photo.1)
9-3 Remove the bridge saddle. (Photo.1)
9-4 Remove the pickup from the slot on the bridge. (Photo.1)
9-5 Disconnect the connector from the PUP circuit board. (Fig.1)
