Yamaha S90 ES, Data List

Page: 34 / 80

Effect Parameter List
34 Data List
3BAND EQ
2BAND EQ
HARMONIC ENHANCER
VOICE CANCELER
AMBIENCE
TALKING MODULATION
BEAT CHANGE
DAMPER RESONANCE
RING MODULATOR
DYNAMIC RING MODULATOR
DYNAMIC FILTER
Master Effect Block
Control Delay2 (stereo)
LO-FI
V-Distortion
Isolator
Dynamic Filter
Slice
Ring Modulator
Multi Band Comp 1
No. Parameter Range Value Table No.
01 EQ Low Gain -12dB – +12dB (52 – 76)
02 EQ Mid Frequency 100Hz – 16.0kHz (14 – 58) 3
03 EQ Mid Gain -12dB – +12dB (52 – 76)
04 EQ Mid Width 0.1 – 12.0 (1 – 120)
05 EQ High Gain -12dB – +12dB (52 – 76)
06 EQ Low Frequency 50Hz – 2.0kHz (8 – 40) 3
07 EQ High Frequency 500Hz – 16.0kHz (28 – 58) 3
15 Input Mode mono/stereo (0 – 1)
No. Parameter Range Value Table No.
01 – 04: Same as the parameters shaded in gray in DELAY L, C, R on page 27.
No. Parameter Range Value Table No.
01 HPF Cutoff Frequency 500Hz – 16.0kHz (28 – 58) 3
02 Drive 0 – 127 (0 – 127)
03 Mix Level 0 – 127 (0 – 127)
No. Parameter Range Value Table No.
11 Low Adjust 0 – 26 (0 – 26)
12 High Adjust 0 – 26 (0 – 26)
No. Parameter Range Value Table No.
01 Delay Time 0.0ms – 50.0ms (0 – 127) 2
02 Wet Output Phase normal/inverse (0 – 1)
06 – 09: Same as the parameters shaded in gray in DELAY L, C, R on page 27.
10 Dry / Wet Balance D63>W – D=W – D<W63 (1 – 127)
No. Parameter Range Value Table No.
01 Vowel a/i/u/e/o (0 – 4)
02 Move Speed 1 – 62 (1 – 62)
03 Drive 0 – 127 (0 – 127)
04 Output Level 0 – 127 (0 – 127)
No. Parameter Range Value Table No.
01 BeatChange -63 – +63 (1 – 127)
02 Beat Range 0 – 12 (0 – 12)
03 PitchChange -63 – +63 (1 – 127)
04 Pitch Range 0 – 12 (0 – 12)
05 Accuracy Type sound4 – normal – rythm4 (0 – 8)
06 EQ Frequency 32Hz – 2.0kHz (4 – 40) 3
07 EQ Gain -12dB – +12dB (52 – 76)
08 EQ Width 1.0 – 12.0 (10 – 120)
10 Dry/Wet Balance D63>W – D=W – D<W63 (1 – 127)
No. Parameter Range Value Table No.
01 HPF Cutoff Frequency 20Hz – 8.0kHz (0 – 52) 3
02 LPF Cutoff Frequency 1.0kHz – 20.0kHz (34 – 60) 3
03 EQ Low Frequency 32Hz – 2.0kHz (4 – 40) 3
04 EQ Low Gain -12 – +12dB (52 – 76)
05 Hi Resonance 0.1 – 1.0 (1 – 10)
06 Pedal Response slow/normal/fast (0 – 2)
10 Dry/Wet Balance D63>W – D=W – D<W63 (1 – 127)
16 Damper Control 0 – 127 (0 – 27)
No. Parameter Range Value Table No.
01 OSC Freq Coarse 0.5 – 5kHz (0 – 127) 19
02 OSC Freq Fine 0 – 127 (0 – 127)
03 LFO Wave tri, sine (0 – 1)
04 LFO Depth 0 – 127 (0 – 127)
05 LFO Speed 0.0Hz – 39.70Hz (0 – 127) 1
06 HPF Cutoff Frequency 20Hz – 8.0kHz (0 – 52) 3
07 LPF Cutoff Frequency 1.0kHz – 20.0kHz (34 – 60) 3
10 Dry / Wet Balance D63>W – D=W – D<W63 (1 – 127)
13 EQ Low Frequency 32Hz – 2.0kHz (4 – 40) 3
14 EQ Low Gain -12dB – +12dB (52 – 76)
15 EQ High Frequency 500Hz – 16.0kHz (28 – 58) 3
16 EQ High Gain -12dB – +12dB (52 – 76)
No. Parameter Range Value Table No.
01 Sensitivity 0 – 127 (0 – 127)
02 HPF Cutoff Frequency 20Hz – 8.0kHz (0 – 52) 3
03 LPF Cutoff Frequency 1.0kHz – 20.0kHz (34 – 60) 3
04 Attack Time 0.3ms – 227ms (0 – 127) 17
05 Release Time 2.6ms – 2171ms (0 – 127) 18
06 Release Curve 0 – 127 (0 – 127)
07 Direction up, down (0 – 1)
08 Dyna Threshold Level 0 – 127 (0 – 127)
09 Dyna Level Offset 0 – 127 (0 – 127)
10 Dry / Wet Balance D63>W – D=W – D<W63 (1 – 127)
13 EQ Low Frequency 32Hz – 2.0kHz (4 – 40) 3
14 EQ Low Gain -12dB – +12dB (52 – 76)
15 EQ High Frequency 500Hz – 16.0kHz (28 – 58) 3
16 EQ High Gain -12dB – +12dB (52 – 76)
No. Parameter Range Value Table No.
01 Filter Type LPF (12dB), LPF (18dB), LPF
(24dB), HPF, BPF, BEF (0 – 5)
02 Sensitivity 0 – 127 (0 – 127)
03 Dyna Level Offset 0 – 127 (0 – 127)
04 Resonance -16 – +111 (0 – 127)
05 Attack Time 0.3ms – 227ms (0 – 127) 17
06 Release Time 2.6ms – 2171ms (0 – 127) 18
07 Release Curve 0 – 127 (0 – 127)
08 Direction up, down (0 – 1)
09 Dyna Threshold Level 0 – 127 (0 – 127)
10 Dry/Wet Balance D63>W – D=W – D<W63 (1 – 127)
13 EQ Low Frequency 32Hz – 2.0kHz (4 – 40) 3
14 EQ Low Gain -12dB – +12dB (52 – 76)
15 EQ High Frequency 500Hz – 16.0kHz (28 – 58) 3
16 EQ High Gain -12dB – +12dB (52 – 76)