Yamaha S08 Voice Editor, Owner'S Manual

Page: 60 / 88

60
Basics Section Quick Guide Reference Appendix
11 -1 PEGSclSns PEG Rate Scaling Sensitivity Determines the sensitivity of the PEG Rate settings (the speed of the PEG change) to note position. 39, 43 *6
11 -2 PEGSclCN PEG Rate Scaling Center Note Deermines the basic pitch (note number) used by the PEGSclSns parameter (above). When the center note
is played, the PEG rate behaves according to its actual settings. 28 *6
12 -1 PEGRtVel PEG Rate Velocity Sensitivity Determines the sensitivity of the PEG Rate (the speed of the PEG change) to velocity . 39 *7
12 -2 PEGLvlVel PEG Level Velocity Sensitivity Determines the sensitivity of the PEG Level (the width of the PEG change) to velocity. 39 *7
FILTER
13 -1 Cutoff Filter Cutoff Frequency Determines the cutoff frequency for the low pass filter. 43
13 -2 Resonance Filter Resonance Determines the amount of filter resonance or emphasis of the Cutoff Frequency. 43
14 -1 CutoffVel Cutoff Velocity Sensitivity Determines how the cutoff frequency responds to velocity. 39, 43
14 -2 ResoVel Resonance Velocity Sensitivity Determines how the resonance effect responds to velocity. 39, 43
15 FltSclFlag Filter Cutoff Scaling Flag Determines the Filter Scaling type, or how the filter cutoff frequency responds to note position. 39 *8
16 Flt BP1-4 Filter Cutoff Scaling BP 1-4 Determines the Break Points (note numbers). BP1 to BP4 are automatically arranged in ascending order
across the keyboard. 28, 39 *9
17 Flt Ofs1-4 Filter Cutoff Sacling Offset 1-4 Determines the Filter Scaling Offset Levels. These Offsets are used by the Break Points (note positions). 39 *9
18 -1 FltSclSns Filter Cutoff Scaling Sensitivity Determines the Filter Scaling Sensitivity , or how much the level of the cutoff frequency in response to the
note positions on the keyboard (scale). 39 *10
18 -2 FltVelCrv Filter Velocity Curve Sensitivitys Appropriate preset cutoff velocity sensitivity curves are available for each element. To decrease the
effect, reduce this value (0: flat, or no effect).
19 -1 FEGHoldR FEG Hold Rate Determines the transition in tone (cutoff frequency) from the moment a note is pressed on the keyboard to
the point at which the sound stops. Refer to the Filter Envelope Generator Settings (page 43). 39, 43
19 -2 FEGAtkR FEG Attack Rate
19 -3 FEGDcy1R FEG Decay 1 Rate
19 -4 FEGDcy2R FEG Decay 2 Rate
19 -5 FEGRelR FEG Release Rate
20 -1 FEGInitL FEG Initial Level
20 -2 FEGAtkL FEG Attack Level
20 -3 FEGDcy1L FEG Decay 1 Level
20 -4 FEGSusL FEG Sustain Level
20 -5 FEGRelL FEG Release Level
21 FEGSclSens FEG Rate Scaling Sensitivity Determines the sensitivity of the FEG Rate settings (the speed of the PEG change) to note position. 39 *6
22 -1 FEGAtkVel FEG Attack Rate Velocity Sensitivity Determines the sensitivity of the FEG Attack Rate to velocity. 39 *7
22 -2 FEGOthVel FEG Other Rate Velocity Sensitivity Determines the sensitivity of all FEG Rates,other than Attack and Hold Rates to velocity. 39 *7
Selected
by Selected
by
Display Parameter Name Explanation
Related
Page
Voice Edit (Normal) Element