76
Voice Mode
■
Hold (Hold Time)
Set the Hold Time.
❏
Settings:
0 ~ 127
■
Attack (Attack Time)
Set the Attack Time.
❏
Settings:
0 ~ 127
■
Decay1 (Decay 1 Time)
Set the Decay 1 Time.
❏
Settings:
0 ~ 127
■
Decay2 (Decay 2 Time)
Set the Decay 2 Time.
❏
Settings:
0 ~ 127
PEG Level
You can set various Level parameters for the Pitch
Envelope Generator (PEG). Combined with the PEG
Time and PEG Release settings, these can be used control
the change in sound from the moment a note is pressed
on the keyboard to the moment it is released (Page 77).
You can set different values for each Element.
■
Hold (Hold Level)
Set the Hold Level.
❏
Settings:
-128 ~ 0 ~ +127 (-4800 cents ~ 0 ~ +4800 cents)
■
Attack (Attack Level)
Set the Attack Level.
❏
Settings:
-128 ~ 0 ~ +127 (-4800 cents ~ 0 ~ +4800 cents)
■
Decay1 (Decay 1 Level)
Set the Decay 1 Level.
❏
Settings:
-128 ~ 0 ~ +127 (-4800 cents ~ 0 ~ +4800 cents)
■
Sustain (Sustain Level)
Set the Sustain Level.
❏
Settings:
-128 ~ 0 ~ +127 (-4800 cents ~ 0 ~ +4800 cents)
PEG Release
You can set Release Time and Release Level parameters for
the Pitch Envelope Generator (PEG). Combined with the
PEG Time and PEG Level settings, these can be used
control the change in sound from the moment a note is
released. You can set different values for each Element.
PEGíRelease) Time Level
EL1234 127 +127
PEGíLevel) Hold Attack Decay1 Sustain
EL1234 +127 -128 +127 + 0
■
Coarse
Adjust the pitch of each Element in semitones.
❏
Settings:
-48 ~ 0 ~ +48
■
Fine
Fine-tune the pitch of each Element.
❏
Settings:
-64 ~ 0 ~ +63
■
Random
Set the amount by which the pitch of each Element
is varied at random for each note you press. A
setting of zero means the original pitch is not
changed.
❏
Settings:
0 ~ 127
PEG VelSens (PEG Velocity Sensitivity)
You can determine how the Pitch Envelope Generator
(PEG) responds to note velocity.
■
Level
Set the velocity sensitivity of the PEG Level.
Positive settings will cause the level to rise the
harder you play the keyboard, and negative values
will cause it to fall.
❏
Settings:
-64 ~ 0 ~ +63
■
Time-Segment
Set the velocity sensitivity of the PEG’s Time
parameters. Use Knob [2] to select the Segment,
then use Knob [1] to set its Time parameter. Positive
Time settings will play back the specified Segment
faster and negative values will play it back slower.
❏
Settings (Time):
-64 ~ 0 ~ +63
❏
Settings (Segment):
attack:
Affects the Hold Time/Attack Time/Decay 1 Time
all:
Affects all PEG Time parameters
PEG Time
You can set various Time parameters for the Pitch
Envelope Generator (PEG). Combined with the PEG
Level and PEG Release settings, these can be used
control the change in sound from the moment a note is
pressed on the keyboard to the moment it is released
(Page 77). You can set different values for each
Element.
PEGíTime) Hold Attack Decay1 Decay2
EL1234 127 127 127 127
PEGíVelSens) Level Time-Segment
EL1234 +63 +63 attack
