84
En
SET MENU
■
Volume trim
D)VOLUME TRIM
Use this feature to adjust the level of the signal input at
each jack. This is useful if you want to balance the level of
each input source to avoid sudden changes in volume
when switching between input sources.
Choices: CD, MD/CD-R, TUNER, DVD, DTV/CBL,
V-AUX, DOCK, DVR, PC/MCX, USB, NET
RADIO, MULTI CH IN
Control range: –6.0 to +6.0 dB
Control step: 1.0 dB
Initial setting: 0.0 dB
Use this menu to adjust the network and USB system
parameters.
■
Network settings
A)NETWORK
Use this feature to view the network parameters (IP
address, etc.) or to change them manually.
The above display is an example.
DHCP
DHCP
When this parameter is set to “ON”, network parameters
for “IP”, “SUBNET”, “GATEWAY”, “DNS (P)” and
“DNS (S)” obtained from a DHCP enabled router are
displayed. If DHCP server function is not available, set
this parameter to “OFF” to configure the network
parameters manually.
Choices:
ON
, OFF
IP address
IP
Use this parameter to specify an IP address assigned to
this unit. This value must not duplicate the one used for
other devices in the target network.
Subnet mask
SUBNET
Use this parameter to specify the subnet mask value
assigned to this unit.
y
For most of the cases, the subnet mask value can be set as
“255.255.255.0”.
Default gateway
GATEWAY
Use this parameter to specify the IP address of the default
gateway.
DVD
DVD-> 0.0dB
[<]/[>]:Adjust
[RETURN]:Exit
D)VOLUME TRIM
3 NET/USB MENU
Note
.
A)NETWORK
B)PLAY STYLE
C)INFORMATION
[]/[]:Up/Down
[ENTER]:Enter
3
NET/USB
MENU
p
p
.
DHCP ON
IP
192.168.000.002
SUBNET
255.255.255.000
GATEWAY 192.168.000.001
DNS (P) 192.168.000.001
DNS (S) 000.000.000.000
SET
>CANCEL
[]/[]:Up/Down
[ENTER]:Enter
A)NETWORK
p
p
