38
To learn a new function
1
2
3
YPC
LEARN
USER
Set to the “LEARN” position.
Press a key on this unit where a new function will be
learned.
About 5–10 cm (2–4 in).
Press and hold the key (on the other remote control
transmitter) where the desired new function is.
Lights up
• When the TRANSMIT/LEARN indicator stops lighting, the
learning is finished.
4
Repeat step 2 and 3 until all desired functions are
successfully learned.
5
Set to the “USER” position.
Try operating your components.
YPC
LEARN
USER
Notes:
• When you operate the desired component with this
remote control transmitter, TRANSMIT/LEARN
indicator will flash steadily.
• The originally preset function of a key is still available in
the USER position if a new function has not been
learned to the key.
• Successful learning to a key results in the erasure of
previously learned functions and their replacement by
the newly learned ones.
• If there is no more room in the memory area for a
function to be learned, the TRANSMIT/LEARN
indicator will flash on and off. In this case, even if some
keys are not occupied with functions from other remote
control transmitters, no further learning is possible.
Memory back-up
All of the learned functions will be retained while you
replace the batteries. However, if no batteries are
installed for a few hours, the learned functions will be
erased and will have to be learned again.
