21
TUNING OPERATIONS
Normally, if station signals are strong and there is no interference, quick automatic-search tuning (AUTOMATIC
TUNING) is possible. However, if signals of the station you want to select are weak, you must tune to it manually
(MANUAL TUNING).
3,4,
2,
1,
AUTOMATIC TUNING
MANUAL TUNING
TUNING
MODE
TUNING
MODE
2
• If the tuning search does not stop at the desired station
(because the signals of the station are weak), change to the
MANUAL TUNING method.
3
To tune to a higher frequency, press the right side once.
To tune to a lower frequency, press the left side once.
4
Select the reception band (FM or AM) while watching
the display.
FM/AM
1
DOWN TUNING UP
If the station where tuning search stops is not the desired
one, press again.
DOWN TUNING UP
AM
FM
or
• To continue tuning search, press and hold the button.
Select the reception band (FM or AM) while watching
the display.
FM/AM
DOWN TUNING UP
Tune to a desired station manually.
AM
FM
or
“AUTO TUNING” goes off.
AUTO
TUNING
Note:
If you tune to an FM station manually, it is received in
monaural mode automatically to increase the signal quality.
Display information
1
Displays the band and frequency of the received
station.
2
Lights up when an FM stereo broadcast is received
in stereo.
3
Indicates the signal level of the received station.
kHz
MHz
AM
FM
STEREO
0
20
l00
40
60
1
2
3
