14
If you have a video cassette recorder and a monitor equipped
with “S” (high-resolution) video terminals, those terminals can
be connected to this unit’s S VIDEO SIGNAL terminals.
Connect the video cassette recorder’s “S” video input and
output terminals to this unit’s S VIDEO SIGNAL VCR IN and
OUT terminals respectively, and connect the monitor’s “S”
video input terminal to this unit’s S VIDEO SIGNAL MONITOR
OUT terminal. Otherwise, connect the video cassette
recorder’s composite video terminals to this unit’s composite
video terminals, and connect the monitor’s composite video
input terminal to this unit’s composite MONITOR OUT terminal.
Note
If video signals are sent to both S VIDEO SIGNAL input
and composite input terminals, the signals will be sent to
their respective output terminals.
MONITOR
OUT
DVD/LD
TV/DBS
IN
OUT
VCR
VIDEO SIGNAL
S VIDEO SIGNAL
MONITOR
OUT
IN
OUT
VCR
ON SCREEN
SELECTOR
PAL NTSC S VIDEO VIDEO
S VIDEO IN
VIDEO IN
S VIDEO
OUT
S VIDEO
IN
VIDEO OUT
VIDEO IN
Video cassette recorder
Monitor TV
If you connect a video cassette recorder, LD player, video
monitor, etc. to this unit, you can display DSP program
names and information about other settings and adjustments
on the video monitor screen which is connected to the
composite VIDEO SIGNAL (or S VIDEO SIGNAL)
MONITOR OUT terminal of this unit. Information is
superimposed over the video image.
If there is no program material on the monitor, the
information will be displayed over a monochromatic
background.
By using the ON SCREEN SELECTOR S VIDEO/VIDEO
switch, select the video monitor connected to the S VIDEO
SIGNAL MONITOR OUT terminal or composite VIDEO
SIGNAL MONITOR OUT terminal on which you want to
display the screen display information.
ON SCREEN SELECTOR S VIDEO/VIDEO switch
S VIDEO:
In this position, the screen display information is
displayed on the video monitor connected to the
S VIDEO SIGNAL MONITOR OUT terminal.
VIDEO:
In this position, the screen display information is
displayed on the video monitor connected to the
composite VIDEO SIGNAL MONITOR OUT
terminal.
PAL/NTSC switch (China and General models only)
This unit is designed for use with the NTSC and PAL
television formats. Set this switch to the position for the
format your monitor TV employs.
PAL:
Outputs signals in the PAL format no matter which
format (PAL or NTSC) of video signal is sent from
an external video unit to this unit.
Set to this position if your monitor TV employs the
PAL format.
NTSC: Outputs signals in the NTSC format no matter which
format (PAL or NTSC) of video signal is sent from
an external video unit to this unit.
Set to this position if your monitor TV employs the
NTSC format.
Note
Make sure to input a video signal which employs the same
format that your monitor TV employs, otherwise a picture will
not be played back normally.
ON SCREEN DISPLAY
(General model)
*
1
*
2
n
CONNECTING TO S VIDEO SIGNAL TERMINALS
*
1
*
2
