Yamaha RX-V777 Owner'S Manual Download Page 110

Page: 110 / 146

CONFIGURATIONS

➤

Configuring various functions (Setup menu)

110

■

Zone2 Set

Configures the Zone2 settings.

Sets the Zone2 maximum volume to prevent excessive loudness.

Setting range

-30.0 dB to +15.0 dB (5.0 dB increments), +16.5 dB

• This setting is available only when “Power Amp Assign” (p.100) is set to “7ch +1ZONE”.

Sets the Zone2 initial volume for when the unit is turned on.

Settings

• This setting is available only when “Power Amp Assign” (p.100) is set to “7ch +1ZONE”.

Changes the zone name (for Zone2) displayed on the TV screen.

You can change the zone name in the same manner as “Zone Rename” in “Main
Zone Set” (p.109).

■

Party Mode Set

(RX-V777 only)

Enables/disables switching to the party mode (p.82).

Choice

Target: Zone 2

Settings

Function

Configures the functions that make the unit easier to use.

■

Display Set

Configures the settings related to the front display and TV screen display.

Adjusts the brightness of the front display.

Setting range

-4 to 0 (higher to brighten)

• The front display may become dark when “ECO Mode” (p.113) is set to “On”.

Selects whether to display short messages on the TV screen when the unit is
operated (such as input selection and volume adjustment).

Settings

Selects the image to be used as wallpaper on the TV.

Settings

Max Volume

Initial Volume

Off

Sets the level at the volume level of the unit when it last entered standby
mode.

Sets at Mute or the specified volume level (-80 dB to +16.5 dB, 0.5 dB
increments).
(This setting works only when the initial volume is set lower than “Max Volume”.)

Zone Rename

Disable

Disables switching to the party mode.

Enable

Enables switching to the party mode. You can turn on/off the party
mode by pressing PARTY on the remote control.

Dimmer (Front Display)

Short Message

Displays short messages on the TV screen.

Off

Does not display short messages on the TV screen.

Wallpaper

Picture 1, Picture 2,
Picture 3

Displays the selected image on the TV screen when there is no video
signal.

Gray

Displays a gray background on the TV screen when there is no video
signal.

Summary of Contents for RX-V777



















































































































































Search results

Summary of Contents for RX-V777

Reviews:

Related manuals for RX-V777

Brands by name

Popular brands

Yamaha RX-V777, Owner'S Manual

Search results

Summary of Contents for RX-V777

Reviews:

Related manuals for RX-V777

Brands by name

Popular brands