1
Follow steps 1 – 6 shown in “BASIC OPERATIONS” on
page 16.
2
Select the desired program that is suitable for the
source.
The selected program name is shown on the display.
3
If desired, adjust the delay time and the output level of
each speaker. (For details, refer to the corresponding
descriptions on page 26 and 27.)
Notes
●
If you prefer to cancel the DSP, press the EFFECT switch.
The sound will be the normal 2-channel stereo without
surround sound effect.
●
When STADIUM, ROCK CONCERT, JAZZ CLUB,
CHURCH or CONCERT HALL is selected, no sound is
heard from the center speaker.
●
When a monaural sound source is played with DOLBY
PRO LOGIC or DOLBY PRO LOGIC ENHANCED, no
sound is heard from the front speakers and the rear
speakers. Sound is heard only from the center speaker.
However, if the center channel mode is in PHANTOM, the
front speakers output the sound of the center channel.
●
When this unit’s Dolby Pro Logic Surround system is used,
if the main-source sound is considerably altered by
overadjustment of the BASS or TREBLE controls, the
relationship between the center and rear channels may
produce an unnatural effect.
25
To play a source with the digital sound field processor
WIDE
PRO LOGIC
2
3
CHAPTER/CH
DISPLAY
STOP
VCR 1
VCR 2
TV
THEATER
70
mm
MOVIE THEATER
ENHANCED
PRO LOGIC
V–AUX
JAZZ CLUB
ROCK
STADIUM
SPORTS
SURROUND
DSP
EFFECT
ON/OFF
MASTER
VOLUME
CENTER LEVEL
REAR LEVEL
DELAY
TIME
TEST
RESET
CLEAR
1
2
3
4
5
6
7
8
MUTING
HALL
CHURCH
9
10
2
3
JAZZ CLUB
ROCK
CONCERT
CONCERT
HALL
PRO LOGIC
ENHANCED
TV
THEATER
SPORTS
STADIUM
DIGITAL SOUND FIELD PROCESSOR
EFFECT
MOVIE THEATER
70mm
CHURCH
