An infrared signal transmitter is not required if you are using Yamaha products that
support remote connections, as the unit does. You can transmit remote control signals
by connecting the REMOTE IN/OUT jacks with monaural mini-jack cables and an
infrared signal receiver.
REMOTE
IN
OUT
REMOTE
IN
OUT
Remote control
Zone2
REMOTE IN/OUT jacks
Infrared signal receiver
Yamaha products (up to
six, including the unit)
REMOTE IN/OUT jacks
Controlling Zone2
Basic procedure for playing back music in Zone2 is as follows.
1
Set MAIN/ZONE 2 to “ZONE 2”.
2
Press
z
(receiver power).
Each time you press the key, Zone2 output is enabled or disabled. When
Zone2 output is enabled, “ZONE2” lights up in the front display.
3
Use the input selection keys to select an input source.
NOTE
▪ Presses NET repeatedly to select a desired network source.
▪ You cannot select Bluetooth, USB and network sources exclusively for each zone. For example,
if you select “SERVER” for Zone2 when “USB” is selected for the main zone, the input source for
the main zone also switches to “SERVER”.
4
Start playback on the external device or select a radio station.
NOTE
▪ The on-screen operations are not available for Zone2. Use the front display to control Zone2.
▪ AirPlay is available in Zone2 only when AirPlay playback is ongoing in the main zone.
▪ Press SCENE to select the input source and settings with just one touch using the SCENE
function. For details on the SCENE function, see the following:
– “Selecting the input source and favorite settings with one touch (SCENE)” (p.74)
▪ To set the sleep timer (120 min, 90 min, 60 min, 30 min, off), press SLEEP repeatedly. The
Zone2 output will be disabled after a specified period of time.
▪ To adjust the Zone2 volume, press VOLUME or MUTE (when using the unit’s internal amplifier).
▪ To enable the Compressed Music Enhancer function, press ENHANCER.
▪ The Zone2 input automatically switches in conjunction with the input source selected in the main
zone when “Main Zone Sync” is selected as the Zone2 input.
▪ To play back DSD audio in Zone2, select “Main Zone Sync” as the Zone2 input or use the party
mode.
▪ Depending on the “Remote Key” setting, the PROGRAM Key may be also available in Zone2.
CAUTION
▪ To avoid unexpected noise, never play back DTS-CDs in Zone2.
En
54
