Yamaha RX-V6671 Owner'S Manual Download Page 94

Page: 94 / 128

Video

Configures the video output settings.

■

Analog to Analog Conversion

Enables/disables the video conversion (p.120) between the analog video jacks
(COMPONENT VIDEO and VIDEO).

Settings

• This unit does not convert 480-line and 576-line video signals interchangeably.

• 480p/576p-, 1080i- and 720p-resolution video signals cannot be output from the VIDEO jacks (p.120).

■

Processing

Enables/disables the video signal processing (resolution and aspect ratio).

Settings

• 720p-, 1080i- and 1080p-resolution video signals cannot be converted (p.120).

❑

Resolution

Selects a resolution to output HDMI video signals when “Processing” is set to “On”.

Settings

• If you need to select a resolution that is not supported by your TV, set “MON.CHK” (p.103) in the

“ADVANCED SETUP” menu to “SKIP” and try again. (Note that output videos may not be displayed on your
TV normally.)

❑

Aspect

Selects an aspect ratio to output HDMI video signals when “Processing” is set to “On”.

Settings

• This setting functions only when 480i/576i or 480p/576p signals are converted into 720p, 1080i or 1080p

signals.

Off

Disables the video conversion between the analog video jacks.

On (default)

Enables the video conversion between the analog video jacks.
Converted video signals are output from the MONITOR OUT jacks only.

Off (default)

Disables the video signal processing.

Enables the video signal processing.
Select a resolution and an aspect ratio in “Resolution” and “Aspect”.

Through

Does not convert the resolution.

Auto (default)

Selects a resolution automatically in accordance with TV
resolution.

480p, 720p, 1080i, 1080p

Output video signals with a selected resolution.
(Only the resolutions supported by your TV are selectable.)

Through (default)

Does not convert the aspect ratio.

16:9 Normal

Outputs 4:3 video signals to a 16:9 TV with black bands on either
side of the screen.

Summary of Contents for RX-V6671

































































































































Search results

Summary of Contents for RX-V6671

Reviews:

Related manuals for RX-V6671

Brands by name

Popular brands

Yamaha RX-V6671, Owner'S Manual

Search results

Summary of Contents for RX-V6671

Reviews:

Related manuals for RX-V6671

Brands by name

Popular brands