CONNECTIONS
Connecting speakers
En
18
■
Bi-amp connection
This unit can be connected to speakers that support bi-amp
connections. When connecting speakers, connect the FRONT jacks
and the SURROUND BACK/BI-AMP jacks as in the diagram
below. Configure the bi-amp settings to activate connections.
■
Multi-zone audio system using the internal
amplifier of this unit
Connect the speakers in the second zone to the EXTRA SP jacks as
in the diagram below.
■
Changing speaker impedance
This unit is configured for 8
Ω
speakers at the factory setting.
When connecting to 6
Ω
speakers, carry out the following
procedure to switch to 6
Ω
. When this unit is configured for 6
Ω
speakers, 4
Ω
speakers can also be used as the front speakers.
1
Switch this unit to the standby mode.
2
Press MAIN ZONE
A
while pressing and holding
STRAIGHT on the front panel.
Release the keys when “ADVANCED SETUP” is displayed on
the front panel display.
After approximately a few seconds, the top menu item is
displayed.
J
1
NOTES
•
Before making bi-amplification connections, remove any
brackets or cables that connect a woofer with a tweeter. Refer to
the instruction manuals of speakers for details. When not making
bi-amplification connections, make sure that the brackets or
cables are connected before connecting the speaker cables.
•
If connecting a bi-amp, then surround back speakers cannot be
used.
FRONT
SURROUND BACK/BI-AMP
SINGLE
CAUTION
The EXTRA SP jacks of this unit should not be connected to a
Passive Loudspeaker Selector Box or more than one loudspeaker
per channel.
Connection to a Passive Loudspeaker Selector Box or multiple
speakers per channel could create an abnormally low impedance
load resulting in amplifier damage. See this owner’s manual for
correct usage.
Compliance with minimum speaker impedance information for all
channels must be maintained at all times. This information is found
on the back panel of this unit.
DOCK
OPTICAL
( TV )
AV 3
AV 1
AV 2
AV 4
AV 5
AV 6
AUDIO 1
AUDIO 2
MULTI CH INPUT
COAXIAL
(CD)
COAXIAL
OPTICAL
VIDEO
HDMI 1
(BD/DVD)
HDMI 2
HDMI 3
HDMI 4
HDMI 5
CENTER
SURROUND
SURROUND BACK/BI-AMP
SINGLE
EXTRA SP
ZONE2/
PRESENCE
FRONT
COMPONENT
VIDEO
PR
PB
Y
HDMI OUT
AV
OUT
SUBWOOFER
SUR.BACK
SURROUND
TRIGGER OUT
+12V
0.1A MAX.
FRONT
CENTER
ARC
IN
REMOTE
OUT
COMPONENT
VIDEO
VIDEO
MONITOR OUT
PR
PB
Y
AUDIO
OUT
ZONE2
OUT
SURROUND
SUR.BACK
PRE OUT
SUBWOOFER
1
2
FRONT
CENTER
SINGLE
SPEAKERS
SIRIUS
ANTENNA
FM
GND
AM
75
EXTRA SP
ZONE2/
PRESENCE
Zone2
PHONES
SILENT CINEMA
TONE CONTROL
STRAIGHT
TV
BD
DVD
CD
RADIO
INPUT
PROGRAM
SCENE
INFO
MEMORY
PRESET
YPAO MIC
FM
AM
CATEGORY
H
ZONE2
ZONE CONTROL
MAIN ZONE
MAIN ZONE
A
STRAIGHT
Continues to the
next page
J
1 :
Refer to the “Extended functionality that can be configured as needed
(Advanced Setup menu)” (
) for details on the Advanced Setup menu.
