Yamaha RX-V640RDS Owner'S Manual Download

Page: 4 / 67

Manufactured under license from Dolby Laboratories.

“Dolby”, “Pro Logic”, and the double-D symbol are
trademarks of Dolby Laboratories.

FEATURES

Other features

◆

96 kHz/24-bit D/A converter

◆

Set menu for optimizing this unit for your Audio/
Video system

◆

Test tone generator for easier speaker balance
adjustment

◆

6-channel external decoder input

◆

Component video input/output capability

◆

S-video signal input/output capability

◆

Optical and coaxial digital audio signal jacks

◆

Video Conversion (Composite Video

⇔

S Video)

◆

Sleep timer

◆

Remote control with preset manufacturer codes

◆

Zone B capability

“DTS”, “DTS-ES Extended Surround” and “Neo:6” are
trademarks of Digital Theater System, Inc.

Built-in 6-channel power amplifier

◆

Minimum RMS output power
(0.06% THD, 20 Hz – 20 kHz, 8

Ω

)

Main:

90 W + 90 W

Center:

90 W

Rear:

90 W + 90 W

Rear center:

90 W

Multi-mode digital sound field processing

◆

Dolby Pro Logic/Dolby Pro Logic II decoder

◆

Dolby Digital/Dolby Digital EX decoder

◆

DTS/DTS-ES Matrix 6.1, Discrete 6.1, DTS Neo:6
Decoder

◆

CINEMA DSP: Combination of YAMAHA DSP
technology and Dolby Pro Logic, Dolby Digital or
DTS

◆

Virtual CINEMA DSP

◆

SILENT CINEMA DSP

Sophisticated AM/FM Tuner

RX-V640RDS

◆

40-Station random access preset tuning

◆

Automatic preset tuning

◆

Preset station shifting capability (Preset editing)

■

About this manual

• This document is the owner’s manual for both RX-V640RDS and DSP-AX640SE. Since DSP-AX640SE does not incorporate a

tuner, descriptions on tuning are not applicable for DSP-AX640SE. Illustrations for the RX-V640RDS are mainly used for
explanations.

•

indicates a tip for your operation.

• Some operations can be performed by using either the buttons on the main unit or on the remote control. In cases

when the button names differ between the main unit and the remote control, the button name on the remote control is
given in parentheses.

• This manual is printed prior to production. Design and specifications are subject to change in part for the reason of

the improvement in operativity ability, and others. In this case, the product has priority.

0102RX-V640_01-08_EN-GB.P65

03.2.12, 4:45 PM

Summary of Contents for RX-V640RDS




































































Search results

Summary of Contents for RX-V640RDS

Reviews:

Related manuals for RX-V640RDS

Brands by name

Popular brands

Yamaha RX-V640RDS, Owner'S Manual

Search results

Summary of Contents for RX-V640RDS

Reviews:

Related manuals for RX-V640RDS

Brands by name

Popular brands