50
Remote Control in Zone 2
You can use the supplied remote control in a second room
(Zone 2), as the Zone 2 remote control. You can select the
input source and control the component located in the
main room directly from the second room regardless of
the listening condition in the main room.
■
To enable Zone 2 mode on the remote
control
1
Press
★★
.
2
Press CODE SET using a ballpoint pen or
similar object.
The TRANSMIT indicator flashes twice.
3
Enter the code number “2999”.
Immediately after you have configured the remote
control for Zone 2, the remote will be to main mode.
When the remote is in main mode, you can turn the
main unit on, or set it in standby mode independently
of the Zone 2 by pressing SYSTEM POWER or
STANDBY.
■
To use the remote control in Zone 2
1
Press
★★
to set the remote control to Zone 2
mode.
The TRANSMIT indicator lights up while the remote
control is in Zone 2 mode.
2
Press SYSTEM POWER to turn Zone 2 power
on.
3
Press an input selector button to select the
input source you want to listen to in the
second room.
Note
• You cannot select VCR2/DVR as the input source.
4
You can control the component by using the
component control area buttons.
y
• The SYSTEM POWER, STANDBY and MUTE on the remote
control works for the second room. However Zone 2 volume
cannot be adjusted with the remote control. Use the control on
the amplifier in the second room.
Note
• The remote control returns to normal mode 10 seconds after
you press
★★
, or if you press any button other than SYSTEM
POWER, STANDBY, MUTE or the input selector buttons. If
the TRANSMIT indicator is turned off, press
★★
to set the
remote control to Zone 2 mode before turning Zone 2 power
on or off, changing the input source, or muting the sound.
■
When you have finished using the unit
To set both the main unit and the Zone 2 in
standby mode
Press STANDBY while holding AMP down.
y
• You can turn on both the main unit and Zone 2 at once by
pressing SYSTEM POWER while holding AMP down.
• The SYSTEM POWER and STANDBY works differently
depending on the selected mode.
ZONE 2 (FOR U.S.A., CANADA AND AUSTRALIA MODELS)
SLEEP
6CH INPUT
V-AUX
D-TV/CBL
AMP
VCR 1
VCR2/DVR
DVD
MD/CD-R
TUNER
CD
CODE SET
TRANSMIT
V-AUX
D-TV/CBL
VCR 1
VCR2/DVR
DVD
MD/CD-R
TUNER
CD
REC
DISC SKIP
SET MENU
SELECT
PRESET/CH
TV INPUT
TV MUTE
A/B/C/D/E
AUDIO
VOLUME
LEVEL
MENU
TEST
STEREO
EFFECT
RETURN
DISPLAY
TITLE
MUTE
+
+
–
+
–
+
–
TV CH
TV VOL
–
HALL
ENTER-
TAINMENT
MUSIC
VIDEO
TV
THEATER
NIGHT
6.1/5.1
MOVIE
THEATER 1
MOVIE
THEATER 2
/DTS
SUR.
ROCK
CONCERT
JAZZ CLUB
3
4
2
1
5
9
0
ENTER
+10
6
7
8
TRANSMIT indicator
off
on
SYSTEM POWER/
STANDBY
turn the main unit
on/standby
turn the Zone2 on/
standby
Main mode
Zone2 mode
0109RX-V640_45-50_EN-U.p65
03.1.10, 6:56 PM
50
