2
Connecting speakers
Connect the speakers placed in your room to the unit. The following diagrams provide connections for 5.1- and 7.1-channel system as an example. For other systems, connect
speakers while referring to the connection diagram for the 5.1
‑
channel system.
Notice
▪ Remove the unit’s power cable from an AC wall outlet and turn off the subwoofer before connecting the speakers.
▪ The speaker has the polarity (+/-). Connect the speaker cable correctly between the positive (+) terminal of the unit and the speaker, and also between the negative (-) terminal of them.
Cables required for connection (commercially available)
Speaker cables (x the number of speakers)
–
+
–
+
Audio pin cable (x1: for connecting a subwoofer)
PRE OUT
HDMI (HDCP2.2)
1(BD/DVD)
HDMI OUT
HDCP2.2
ARC
NETWORK
(NET)
LESS
S
AV 4
AV 3
AUDI0 2
AUDIO 1
AV 2
AV 1
OPTICAL
(TV)
COAXIAL
COAXIAL
VIDEO
AM
FM
75 Ω
ANTENNA
(RADIO)
MONITOR
OUT
1
2
SUBWOOFER
PRE OUT
HDMI (HDCP2.2)
1(BD/DVD)
2
3
4
HDMI OUT
HDCP2.2
ARC
NETWORK
(NET)
FRONT
CENTER
SURROUND
SINGLE
LESS
AV 4
AV 3
AUDI0 2
AUDIO 1
AV 2
AV 1
SPEAKERS
SURROUND BACK/PRESENCE
/BI-AMP/ZONE B
9
3
5
4
7
6
2
1
1
2
3
4
The unit (rear)
Audio pin cable
Use a subwoofer with
built-in amplifier.
Subwoofer
Surround (L)
Surround (R)
Center
Front (R)
Front (L)
10 mm (3/8”)
Precaution for connecting of the speaker cables
Improper connecting of the speaker cables may cause short circuit and
also damage the unit or the speakers.
▪ Twist the bare wires of the speaker cables
firmly together.
▪ Do not let the core wires of the speaker cable
touch one another.
▪ Do not let the core wires of the speaker cable
come into contact with the unit’s metal parts
(rear panel and screws).
If “Check SP Wires” appear on the front display when the unit is turned
on, turn off the unit, and then check the speaker cables short circuit.
Surround back (R) Surround back (L)
R
Presence (R)
E
Presence (L)
* You cannot use the surround back
speakers and the presence speakers
at the same time.
En
21
