4
L
R
–
+
–
+
1
2
3
4
6
5
7
8
9 0
q
w e r t y u i o p a
s d
f
6
VOLUME
Turn this control to turn up or down the volume.
7
PHONES jack
Connect the headphones to the PHONES jack. You can
listen to the sound to be output from the main speakers
through the headphones.
When using headphones only, set both SPEAKERS A and B
to the OFF position and press EFFECT to turn off the effect
speakers (center and rear) (so that no DSP program name
appear on the display).
8
SPEAKERS
Set A or B (or both A and B) to the ON position for the main
speaker system (connected to this unit) that you want to use.
Set the button(s) to the OFF position for the main speaker
system that you don’t want to use.
9
PROGRAM selector
Press
l
or
h
to select a DSP program when the effect
speakers (center and rear) are turned on. The name of the
selected program appears on the display.
0
EFFECT
Press this button to turn on or off the effect speakers (center
and rear). If you turn them off, all Dolby Digital and DTS
audio signals are directed to the right and left main
speakers. In that case, the output levels of the right and left
speakers may not match.
CONTROLS AND FUNCTIONS
Front Panel
1
STANDBY/ON
Press this switch to turn on the power of this unit or to set
this unit in the standby mode. Before turning the power on,
set VOLUME to the “
m
” position.
Standby mode
In this mode, this unit consumes a very small quantity of
power to receive infrared-signals from the remote
control.
2
Remote control sensor
This receives signals from the remote control.
3
Display
This shows various information. (Refer to page 6 for
details.)
4
INPUT MODE
Press this button to select the input mode among AUTO,
DTS and ANALOG for the DVD/LD, TV/digital TV and
satellite tuner sources.
5
INPUT SELECTOR
Turn this selector to select the input source (TUNER, CD,
PHONO, V-AUX, VCR, SAT/D-TV, DVD/LD) that you
want to listen to or watch. The arrow for the selected input
source indicator lights up on the display.
0102V496RDS01-07_EN
1/19/0, 10:26 AM
4
