Yamaha RX-V483, Owner'S Manual

Page: 19 / 157

2 Connecting speakers
Connect the speakers placed in your room to the unit. The following diagrams provide connections for a 5.1-channel system as an example. For other systems, connect speakers
while referring to the connection diagram for the 5.1-channel system.
Notice
▪ Remove the unit’s power cable from an AC wall outlet and turn off the subwoofer before connecting the speakers.
▪ The speaker has the polarity (+/-). Connect the speaker cable correctly between the positive (+) terminal of the unit and the speaker, and also between the negative (-) terminal of them.
Cables required for connection (commercially available)
Speaker cables (x the number of speakers)
–
+
–
+
Audio pin cable (x1: for connecting a subwoofer)
OPTICAL
COAXIAL
COAXIAL
VIDEO VIDEO VIDEO
AM FM
75 Ω
ANTENNA
(RADIO)
MONITOR OUT
PRE OUT
SUBWOOFER
HDMI
(HDCP2.2)
(BD/DVD)
2 3 1 4
HDMI OUT
(HDCP2.2)
ARC
NETWORK
(NET)
FRONT CENTER
SPEAKERS
SURROUND/BI-AMP
/ZONE B
AV 3
AUDIO 1
AUDI0 2
AUDI0 3
AV 2 AV 1
(TV)
OPTICAL
COAXIAL
COAXIAL
VIDEO VIDEO VIDEO
AM FM
75 Ω
ANTENNA
(RADIO)
MONITOR OUT
PRE OUT
SUBWOOFER
HDMI (HDCP2.2)
(BD/DVD)
2 3 1 4
HDMI OUT
(HDCP2.2)
ARC
NETWORK
(NET)
FRONT CENTER
SPEAKERS
SURROUND/BI-AMP
/ZONE B
AV 3
AUDIO 1
AUDI0 2
AUDI0 3
AV 2 AV 1
(TV)
1 2 3 4
9
3 5 4 2 1
Audio pin cable
Use a subwoofer with built-in amplifier.
Subwoofer
Surround (L) Surround (R) Center Front (R) Front (L)
10 mm
(3/8”)
Precaution for connecting of the speaker cables
▪ Prepare speaker cables in a place away from the unit, to avoid
accidentally dropping wire strands into the unit's interior which could
result in a short circuit or malfunction of the unit.
▪ Improper connecting of the speaker cables may cause short circuit and
also damage the unit or the speakers.
– Twist the bare wires of the speaker cables
firmly together.
– Do not let the bare wires of the speaker
cable touch one another.
– Do not let the bare wires of the speaker
cable come into contact with the unit’s
metal parts (rear panel and screws).
▪ If “Check SP Wires” appear on the front display when the unit is turned
on, turn off the unit, and then check the speaker cables short circuit.
En
19