Playing back more high-quality sounds with bi-amp connections
Using the four internal amplifiers for front speakers allows you to have more high-
quality sounds.
For example, you can use 2-way bi-amplified speakers with a woofer and tweeter for
front speakers. It produces expansive sound in bi-amp system featuring a woofer and
tweeter. By directly driving each speaker individually, it produces powerful sound
while maintaining the feeling of high S/N ratio.
Note
When using the four internal amplifiers in bi-amp system, the unit supports only 2.1 or 3.1-channel speaker
system.
Connecting front speakers that support bi-amp
connections
When using front speakers that support bi-amp connections, connect them to the
FRONT terminals and SURROUND/BI-AMP/ZONE B terminals.
To enable the bi-amp function, set “Power Amp Assign” (p.90) in the “Setup” menu
to “BI-AMP” after connecting the power cable to an AC wall outlet.
1
2
3
9
OPTICAL
(TV)
COAXIAL
COAXIAL
VIDEO
AM
FM
75 Ω
ANTENNA
MONITOR
OUT
SUBWOOFER
PRE OUT
HDMI (HDCP2.2)
1(BD/DVD)
2
3
4
HDMI OUT
HDCP2.2
ARC
NETWORK
(NET)
FRONT
CENTER
SPEAKERS
SURROUND/BI-AMP
/ZONE B
LESS
AV 4
AV 3
AUDI0 2
AUDIO 1
AV 2
AV 1
The unit (rear)
Note
▪ Surround speakers or Zone B speakers cannot be used during bi-amp connections.
▪ The FRONT terminals and SURROUND/BI-AMP/ZONE B terminals output the same signals.
Notice
▪ Before making bi-amp connections, remove any brackets or cables that connect a woofer with a
tweeter. Refer to the instruction manual of the speakers for details. If you are not making bi-amp
connections, make sure that the brackets or cables are connected before connecting the speaker
cables.
En
77
