13
ENGLISH
7
4
2
Display
3
1,6
5
Play the source.
(If you want to tune in a station, refer to page 16.)
6
Adjust to the desired output level.
1
Set the VOLUME control to the “ ” position.
0
VOLUME
–dB
7
If desired, adjust the BASS, TREBLE, BALANCE
controls, etc. (refer to page 15) and use the digital
sound field processor. (Refer to page 18.)
0
VOLUME
–dB
PLAYING A SOURCE
SPEAKERS
A B
ON
_
ON
OFF
—
OFF
4
Select the front speakers to be used.
÷
If you use two front speaker systems, press both the
A and B switches.
2
Turn on the power.
POWER
3
Select the desired input source.
(For video sources, turn the TV/monitor ON.)
MONITOR
VCR TAPE
LD TUNER CD PHONO
The corresponding indicator lights on the display.
(When TUNER is selected, the previously received
frequency appears on the display.)
Notes
In step 3, if two or more program sources are selected at
the same time (by using input selectors), be sure to
remember the priority order of the input sources.
Priority order of audio sources:
1)TAPE MONITOR,
2)VCR MONITOR, 3)LD, TUNER, CD or PHONO.
Priority order of video sources:
1)VCR MONITOR and
2)LD.
÷
When selecting LD, TUNER, CD or PHONO, make sure
that TAPE MONITOR and VCR MONITOR are not
selected. To cancel VCR MONITOR or TAPE MONITOR,
press the corresponding button.
÷
If TAPE MONITOR and VCR MONITOR are selected at the
same time, the playback result will be the picture from the
VCR and the sound from the audio tape. In this case,
even if other input source (LD, TUNER, CD or PHONO) is
selected, the sound of the audio tape is output.
÷
If LD and TAPE MONITOR are selected at the same time,
the playback result will be the picture from the LD player
and the sound from the audio tape.
÷
Once you play the LD player, its picture will not be
interrupted even if other input selectors except VCR
MONITOR are selected.
