Yamaha RX-V467, Owner'S Manual

Page: 52 / 113

En
52
SETUP
Setting various functions (Setup menu)
■
Generating test tones
Turns the test tone generator on or off.
■
Adjusting the graphic equalizer
1 When “EQ Select” is displayed, use
j
Cursor
D
/
E
to select “GEQ” and press
j
ENTER .
2 Check that “Channel” selects and use
j
Cursor
D
/
E
to select the speaker for which you want to
adjust the equalizer.
SW
C
L
SL
SR
R
Channel
;
FRNT L
GEQ
VOL.
The speaker you are adjusting
3
Press
j
Cursor
C
repeatedly to select the
frequency you want to adjust, then use
j
Cursor
D
/
E
to adjust the volume.
Raising volume: Press
j
Cursor
E
.
Lowering volume: Press
j
Cursor
D
.
4 When you have finished making adjustments,
press
i
SETUP to close the Setup menu.
SW
C
L
SL
SR
R
63Hz
GEQ
VOL.
Frequency band Setting the volume level for the
selected frequency
Frequency
range
63 Hz/160 Hz/400 Hz/1 kHz/2.5 kHz/6.3 kHz/
16 kHz
Adjustable
range
-6.0 dB to 0 dB to +6.0 dB
Default setting 0 dB
Adjustment
increments
0.5 dB
You can use
j
Cursor
B
/
C
to select another frequency or
return to step 2. Repeat steps 2-3 to adjust the tone to your
liking.
Test Tone
Off
(Default) Does not generate test tones.
On
Generates test tones. While “On” is selected, test
tones are produced constantly.
You can use the test tone in a variety of circumstances. For
example, you can adjust the volume balance settings for each
speaker, or whenever you adjust the settings on the internal
graphic equalizer, you can listen to the actual effect while
operating this unit. Turn the test tone off when you have finished
making adjustments.