20
En
Optimizing the speaker setting for your listening room (YPAO)
Select “Retry” or “Exit” using
n
Cursor
l
/
h
and then press
n
ENTER
.
Retry
Performs “Auto Setup” again.
Exit
Terminates the measurement and “Auto Setup.”
y
•
See page 51 for details on error messages.
•
When “E-5:NOISY” appears, you can continue measurement. To
continue measurement, select “Proceed.” However, we recommend that
you solve the problem first and then perform measurement again.
If a problem occurs during measurement, “W-xx” (xx
indicates the number) is displayed on the front panel
display. Check the error and solve the problems.
y
•
See page 52 for details on warning messages.
•
Optimization will not be performed while a warning message is
displayed. We recommend that you solve the problem and perform “Auto
Setup” again.
1
If a warning message is displayed, press
n
ENTER
.
Details of the warning message are displayed. If there
are multiple warning messages, you can display the
next message using
n
Cursor
h
.
2
To return to the top result display, press
n
ENTER
again.
When an error message is displayed
during measurement
When a warning message is displayed
after measurement
W-1:PHASE
