Yamaha RX-V381 Owner'S Manual Download

Page: 32 / 87

Selecting the sound mode

The unit is equipped with a variety of sound programs and surround decoders that

allow you to enjoy playback sources with your favorite sound mode (such as sound
field effect or stereo playback).

TUNING

PRESET

MUTE

TUNING

MEMORY

TOP MENU

HOME

POP-UP/MENU

DISPLAY

RETURN

SETUP

OPTION

ENTER

FM/AM

VOLUME

PROGRAM

USB

STRAIGHT

ENHANCER

BASS

BLUETOOTH

INPUT

DVD

S C E N E

RADIO

SLEEP

BLUE

YELLOW

GREEN

RED

PROGRAM

STRAIGHT

ENHANCER

BASS

DVD

S C E N E

RADIO

SLEEP

DVD

S C E N E

RADIO

SLEEP

STRAIGHT

ENHANCER

BASS

PROGRAM

I want to enjoy viewing video sources such as movies, TV programs, or

games.

• Select a sound program suitable for each video source by pressing PROGRAM

repeatedly (p.33).

I want to enjoy listening to music sources or stereo playback.

• Select a sound program suitable for music or stereo playback by pressing

PROGRAM repeatedly (p.34).

I want to enjoy multichannel playback from 2-channel sources.

• Select a surround decoder in the “Option” menu (p.47).

I want to enjoy unprocessed sounds in original channels.

• Switch to the straight decode mode by pressing STRAIGHT (p.35).

I want to enjoy enhanced bass sounds.

• Enable Extra Bass by pressing BASS (p.36).

I want to enjoy listening to compressed music.

• Enable Compressed Music Enhancer by pressing ENHANCER (p.36).

This mode lets you enjoy compressed music stored on a Bluetooth device or USB

storage device with additional depth and breadth (p.36).

Note

▪ The sound mode can be applied separately to each input source.
▪ When you play back audio signals with a sampling rate of higher than 96 kHz, the straight decode mode

(p.35) is automatically selected.

▪ You can check which speakers are currently outputting sound by looking at the speaker indicators on the

unit’s front panel (p.8).

Summary of Contents for RX-V381
























































































Search results

Summary of Contents for RX-V381

Reviews:

Related manuals for RX-V381

Brands by name

Popular brands

Yamaha RX-V381, Owner'S Manual

Search results

Summary of Contents for RX-V381

Reviews:

Related manuals for RX-V381

Brands by name

Popular brands