En
51
SETUP
Setting sound field program parameters
■
Parameters usable in certain sound field
programs
2ch Stereo only
Automatically bypasses the DSP circuit and tone control circuit
depending on the condition of tone control etc., when an analog
sound source is played back. You can enjoy a higher quality sound.
5ch Stereo only
Adjusts the center channel volume.
J
1
Adjusts the volume of the surround L channel.
J
1
Adjusts the volume of the surround R channel.
J
1
Straight Enhancer/5ch Enhancer only
Adjusts the effect level of the compressed music enhancer mode.
■
Parameters usable in surround decoder
q
PLII Music only
Adjusts the soundscape of the front sound field. Sends front left/
right channels sounds to the surround speakers as well as the front
speakers for a wraparound effect.
Spreads the center channel sound to the front left and right
speakers to suit your needs or preferences. Set this parameter to 0
for outputting the center sound from the center speaker only, or to 7
for outputting it from the front left/right speaker only.
Adjusts the difference in level between the front sound field and
the surround sound field. You can adjust the difference in level
created by the software being played back to obtain the preferred
sound balance.
The surround sound gets stronger as you make the value more
negative, and the front sound gets stronger as you make the value
more positive.
When Neo:6 Music is selected
Adjusts the front left and right channel output relative to the center
channel to make the center channel more or less dominant as
necessary.
Direct
Auto
(Default)
Outputs sound by bypassing the DSP circuit and tone
control circuit when both tone controls of “Bass” and
“Treble” are set to 0dB.
Off
Does not bypass the DSP circuit and tone control
circuit.
CT Level
Adjustable range
0 to 100%
Default setting
100%
SL Level
Adjustable range
0 to 100%
Default setting
100%
SR Level
Adjustable range
0 to 100%
Default setting
100%
EFCT LVL
High
(Default)
Standard effect.
Low
Sets when the high-frequency signals of the source are
emphasized excessively.
Panorama
Off
(Default)
Disables the effect.
On
Enables the effect.
CT Width
Adjustable range
0 to 7
Default setting
3
Dimension
Adjustable range
-3 to +3
Default setting
0
C.Image
Adjustable range
0.0 to 1.0
Default setting
0.3
J
1 :
Not displayed when speakers are set to be inactive.
