Yamaha RX-V3300 Owner'S Manual Download Page 86

Page: 86 / 95

DIGITAL SOUND FIELD PARAMETER DESCRIPTIONS

For 8ch Stereo

■

CT LEVEL (Center Level)

Control Range 0 – 100 %

Function:

This parameter adjusts the volume level for the center channel in 8-channel stereo mode.

■

RL LEVEL (Rear Left Level)

Control Range 0 – 100 %

Function:

This parameter adjusts the volume level for the rear left channel in 8-channel stereo mode.

■

RR LEVEL (Rear Right Level)

Control Range 0 – 100 %

Function:

This parameter adjusts the volume level for the rear right channel in 8-channel stereo mode.

■

RC LEVEL (Rear Center Level)

Control Range 0 – 100 %

Function:

This parameter adjusts the volume level for the rear center channel in 8-channel stereo mode.

■

FL LEVEL (Front Left Level)

Control Range 0 – 100 %

Function:

This parameter adjusts the volume level for the front effect left channel in 8-channel stereo mode.

■

FR LEVEL (Front Right Level)

Control Range 0 – 100 %

Function:

This parameter adjusts the volume level for the front effect right channel in 8-channel stereo mode.

For PRO LOGIC Music

■

PANORAMA

Control Range OFF/ON

Function:

Extends the front stereo image to include the surround speakers for wraparound effect.

■

DIMENSION

Control Range –3 – STD – +3

Function:

Gradually adjusts the soundfield either towards the front or towards the rear.

■

CT WIDTH (Center Width)

Control Range 0 – 7

Function:

Adjusts the center image from all three front speakers to varying degrees.

For DTS Neo: 6 Music

■

C. IMAGE (Center Image)

Control Range 0 – 0.5

Function:

This parameter adjusts the center image from all three front speakers.

0111V3300_77-82_EN(UA)

7/26/02, 6:04 PM

Summary of Contents for RX-V3300
































































































Search results

Summary of Contents for RX-V3300

Reviews:

Related manuals for RX-V3300

Brands by name

Popular brands

Yamaha RX-V3300, Owner'S Manual

Search results

Summary of Contents for RX-V3300

Reviews:

Related manuals for RX-V3300

Brands by name

Popular brands