En
156
ADVANCED SETUP menu items
X
Default settings are underlined.
Changing the speaker impedance setting (SPEAKER IMP.)
Change the unit’s speaker impedance settings depending on the impedance of the speakers
connected.
Settings
Turning on/off the remote control sensor
(REMOTE SENSOR)
Turn on/off the remote control sensor on the main unit. While the remote control sensor is
turned off, you cannot control the unit from the remote control.
Settings
Selecting the remote control ID (REMOTE ID)
Change the unit’s remote control ID so that it matches the remote control’s ID (default: ID1).
When using multiple Yamaha AV receivers, you can set each remote control with a unique
remote control ID for its corresponding receiver.
Settings
ID1, ID2
■
Changing the remote control ID of the remote control
1
To select ID1, hold down the cursor key (
e
) and SCENE1 together for 5 seconds.
To select ID2, hold down the cursor key (
e
) and SCENE2 together for 5 seconds.
X
If the remote control ID does not match that of the unit, “RemID Mismatch” appears on the unit’s front
display when the remote control is operated.
Item
Function
Page
SPEAKER IMP.
Changes the speaker impedance setting.
REMOTE SENSOR
Turns on/off of the remote control sensor on the main unit.
REMOTE ID
Selects the unit’s remote control ID.
TV FORMAT
Switches the video signal type.
MONITOR CHECK
Removes the limitation on HDMI video output.
4K MODE
Selects the HDMI 4K (60 Hz/50 Hz) signal format.
DTS MODE
Switches the DTS format notification setting.
BACKUP/RESTORE
Creates backup of the settings of the unit, or recovers the settings from
the backup.
INITIALIZE
Restores the default settings.
FIRM. UPDATE
Updates the firmware.
VERSION
Checks the version of firmware currently installed on the unit.
6 Ω MIN
Select this option when you connect 6-ohm speakers to the unit. You can also use
4-ohm speakers as the front speakers.
8 Ω MIN
Select this option when you connect 8-ohm or higher speakers to the unit.
8¬MIN
SPEAKER¡IMP.
ON
Turns on the remote control sensor.
OFF
Turns off the remote control sensor.
ON
REMOTE SENSOR
ID1
REMOTE ID