Yamaha RX-V3075, Owner'S Manual

Page: 48 / 169

PREPARATIONS
➤
Connecting the power cable
En
48
Connecting a device compatible with the trigger function
The trigger function can control an external device in conjunction with operating the
unit (such as powering on/off and input selection). If you have a Yamaha subwoofer that
supports a system connection or a device with a trigger input jack, you can use the
trigger function by connecting the external device to one of the TRIGGER OUT jacks.
• You can configure the trigger function settings in “Trigger Output1” and “Trigger Output2” (p.125) in the
“Setup” menu.
After all the connections are complete, connect the supplied power cable to the unit
and then to an AC wall outlet.
AV 6 AV 7
TRIGGER
OUT
1
2
RS-232C
OUT IN OUT
REMOTE
1 2
AC IN
1
2
CENTER FRONT
BI–AMP
ZONE 2/ZONE 3/F.PRESENCE/
R
R
L
L
SUBWOOFER
CENTER CK
LE) (FRONT)
(REAR)
EXTRA SP1
12V 0.1A
TRIGGER
OUT
1
2
12V 0.1A
The unit (rear)
TRIGGER OUT
1–2 jacks
System connection
input
Yamaha subwoofer that
supports a system connection
7 Connecting the power cable
AV 6 AV 7
TRIGGER
OUT
1
2
RS-232C
OUT IN OUT
REMOTE
1 2
AC IN
1
2
CENTER FRONT
BI–AMP
ZONE 2/ZONE 3/F.PRESENCE/
R
R
L
L
SUBWOOFER
CENTER CK
LE) (FRONT)
(REAR)
EXTRA SP1
12V 0.1A
To an AC wall outlet
The unit (rear)
1 2 3 4 5 6
Other connections
7
Power cable connection
8 9