background image

33

English

PLAYBACK

BA

S

IC

 

OPERA

T

ION

• Some 6.1-channel compatible discs do not have a signal (flag) 

which this unit can automatically detect. When playing these 
kinds of discs with 6.1-channel, select “ON”.

• 6.1-channel playback is not possible even if EX/ES is pressed in 

the following cases:
– When SURR B L/R SP is set to “NONE” (see page 49).
– When the source connected to the MULTI CH INPUT jack is 

being played.

– When the source being played does not contain surround L/R 

channel signals.

– When Dolby Digital KARAOKE source is being played.
– When “2ch Stereo”, “7ch Stereo” or “Direct Stereo” is 

selected.

• When the power of this unit is turned off, the input mode will be 

reset to AUTO.

• When the DTS ES decoder is applied to DTS 96/24 signals, you 

cannot use the DTS 96/24 decoding feature.

• The Pro Logic IIx decoder is not available when SURR B L/R 

SP is set to “NONE” (see page 49).

• “PLIIx Movie” cannot be selected when SURR B L/R SP is set 

to “LRGx1” or “SMLx1” (see page 49).

Enjoying 2-channel software

Signals input from 2-channel sources can also be played 
back on multiple channels.

Press 

q

/DTS on the remote control to select the 

decoder.

You can select from the following modes depending on 
the type of software you are playing and your personal 
preference.

PRO LOGIC SUR. STANDARD

Standard processing for Dolby Surround sources.

PRO LOGIC SUR. ENHANCED

CINEMA DSP enhanced processing for Dolby Surround 
sources

PRO LOGIC IIx Movie

 

*

Dolby Pro Logic II/IIx processing for movie software.

PRO LOGIC IIx Music

 

*

Dolby Pro Logic II/IIx processing for music software.

PRO LOGIC IIx Game

 

*

Dolby Pro Logic II/IIx processing for game software.

DTS Neo:6 Cinema

DTS processing for movie software.

DTS Neo:6 Music

DTS processing for music software.

*

 Use the PLII/PLIIx parameter to select the Pro Logic II or

 Pro Logic IIx decoders (see page 80).

The Pro Logic IIx decoder is not available when SURR B L/R SP 
is set to “NONE” (see page 49).

Listening to high fidelity stereo sound 
(Direct Stereo)

Direct Stereo allows you to bypass this unit’s decoders and 
DSP processors to enjoy pure high fidelity sound from 2-
channel PCM and analog sources.

Rotate PROGRAM (or set 10 KEY/DSP to DSP, 
then press STEREO repeatedly) to select DIRECT 
STEREO.

• To avoid unexpected noise, do not play DTS-encoded CDs in 

this mode.

• When multi-channel signals (Dolby Digital and DTS) are input, 

this unit automatically selects an analog signal input (when 
DTS is selected as an input mode, no sound will be heard).

• No sound will be output from the subwoofer.
• TONE CONTROL (page 31) and SET MENU (page 47) 

settings are not effective.

• The front panel display automatically dims.

Listening at night

This mode reproduces dialogue clearly while reducing the 
volume of loud sound effects for easier listening at low 
volumes or at night.

Press NIGHT on the remote control.

The NIGHT indicator in the front panel 
display lights up.
Press NIGHT again to cancel. The 
NIGHT indicator goes off.

y

• You can use the night listening mode with any sound field 

programs except Direct Stereo (even though the NIGHT 
indicator lights up during Direct Stereo mode).

• Night listening mode may vary in effectiveness depending on 

the input source and surround sound settings you use.

Notes

/DTS

+10

Note

Notes

STEREO

EX/ES

DSP

10KEY

ROCK

MOVIE

THX

MUSIC

TV THTR

ENTERTAIN

HALL

CHURCH

JAZZ

NIGHT

/DTS

CHP/INDEX

1

5

9

6

10

+10

+100

7

8

2

3

4

Direct Stereo

Front panel

or

PROGRAM

Remote control

NIGHT

+100

00_RX-V2400U_EN.book  Page 33  Friday, October 10, 2003  10:54 AM

Summary of Contents for RX-V2400































































































Reviews: