Yamaha RX-V2200 Owner'S Manual Download Page 52

Page: 52 / 88

REMOTE CONTROL FEATURES

Press

to select the clear mode.

The mode is shown in the display window in the
following order:

Press and hold CLEAR again for about 3
seconds.

“C:OK” appears in the display window.

Note

• “C:NG” appears in the display window if the operation is

unsuccessful. In this case, start over from step 2.

Press CLEAR to exit from the clearing mode.

Once you have cleared a learned function or macro
for a button, the button reverts to the factory setting.

Note

• “ERROR” appears in the display window under the following

circumstances:

– when pressing a button other than the cursor and ENTER;
– when pressing more than one button at once; or
– when MACRO ON/OFF, 10KEY/DSP or PARAMETER/SET

MENU is switched to another position.

CLEAR

Clearing a Learned Function or
Macro

You can clear the function learned in a certain
programmable button in each area.

■

To clear a learned function

Press an input selector button,

select the source component you want to
clear the function.

The selected component name appears in the display
window.

Press LEARN by using a ballpoint pen or
similar object.

“LEARN” and the selected component name appear
alternately in the display window.

Note

• If you do not press any button within 30 seconds during step 3,

the clearing process is canceled. If this happens, start over from
step 2.

Press the button that you want to clear for 3
seconds as pressing CLEAR by using a
ballpoint pen or similar object.

“C:OK” appears in the display window.

Press LEARN again to exit
from the learning mode.

■

To clear the macro function

Press an input selector button,

select the source component for which you
want to clear the function.

The selected component name appears in the display
window.

LEARN

CLEAR

Clears all programmed functions
including setup manufacturer
codes. This returns to the
factory settings.

(L: name of a component) Clears
all learned functions for the
component area. Press the input
selector button,

to select

the component.

Clears all learned functions for
this unit control area.

Clears all learned functions.

Clears all programmed macros.

Clears all renamed source
names in the display window.

LEARN

PHONO

DVD

VCR2/DVR

VCR 1

D-TV/LD

CBL/SAT

CD-R

MD/TAPE

TUNER

V-AUX

PHONO

DVD

VCR2/DVR

VCR 1

D-TV/LD

CBL/SAT

CD-R

MD/TAPE

TUNER

V-AUX

0108V2200_42-54_EN(U)

01.8.1, 9:44 AM

Summary of Contents for RX-V2200

























































































Search results

Summary of Contents for RX-V2200

Reviews:

Related manuals for RX-V2200

Brands by name

Popular brands

Yamaha RX-V2200, Owner'S Manual

Search results

Summary of Contents for RX-V2200

Reviews:

Related manuals for RX-V2200

Brands by name

Popular brands