Yamaha RX-V2073 Owner'S Manual Download Page 34

Page: 34 / 167

PREPARATIONS

➤

Input/output jacks and cables

■

Video/audio jacks

❑

HDMI jacks

Transmit digital video and digital sound through a single
jack. Use an HDMI cable.

• Use a 19-pin HDMI cable with the HDMI logo. We recommend using

a cable less than 5.0 m long to prevent signal quality degradation.

• The unit’s HDMI jacks support the HDMI Control, Audio Return

Channel (ARC), and 3D and 4K video transmission features.

• Use high speed HDMI cables to enjoy 3D or 4K videos.

■

Video jacks

❑

COMPONENT VIDEO jacks

Transmit video signals separated into three
components: luminance (Y), chrominance blue (P

and chrominance red (P

). Use a component video

cable with three plugs.

❑

S VIDEO jack

Transmits S-video signals that include luminance (Y)
and chrominance (C) components. Use an S-video
cable.

❑

VIDEO jacks

Transmit analog video signals. Use a video pin cable.

■

Audio jacks

❑

OPTICAL jacks

Transmit digital audio signals. Use a digital optical
cable. Remove the tip protector (if available) before
using the cable.

❑

COAXIAL jacks

Transmit digital audio signals. Use a digital coaxial
cable.

❑

AUDIO jacks

Transmit analog stereo audio signals. Use a stereo pin
cable.

Input/output jacks and cables

AV 1

HDMI cable

COMPONEN

AV 1

Component video cable

S-video cable

AV 1

Video pin cable

Digital optical cable

Digital coaxial cable

Stereo pin cable

Summary of Contents for RX-V2073








































































































































































Search results

Summary of Contents for RX-V2073

Reviews:

Related manuals for RX-V2073

Brands by name

Popular brands

Yamaha RX-V2073, Owner'S Manual

Search results

Summary of Contents for RX-V2073

Reviews:

Related manuals for RX-V2073

Brands by name

Popular brands