39
En
BA
S
IC
OPERA
T
ION
English
This unit is equipped with a variety of precise digital decoders that allow you to enjoy multi-channel playback from
almost any stereo or multi-channel sound source. This unit is also equipped with a Yamaha digital sound field processing
(DSP) chip containing several sound field programs which you can use to enhance your playback experience.
y
The Yamaha CINEMA DSP sound field programs are compatible with all Dolby Digital, DTS, Dolby Surround, Dolby TrueHD and
DTS-HD Master Audio sources.
Rotate the
N
PROGRAM
selector (or set the
operation mode selector to
E
AMP
and then
press one of the sound field selector buttons (
P
)
repeatedly).
The name of the selected sound field program appears in
the front panel display and in the OSD.
y
• You can select the desired sound field program and setting the
parameters by using the OSD menu (page 67).
• Available sound field parameters and the created sound field
differ depending on the input sources and the settings of this
unit.
• When you select an input source, this unit automatically selects
the last sound field program used with the corresponding input
source.
• Sound field programs cannot be selected when the component
connected to the MULTI CH INPUT jacks is selected as the
input source (page 36) or when this unit is in the Pure Direct
mode (page 46).
• When you play back DTS 96/24 sources with any sound field
program, this unit applies the selected program without
activating the DTS 96/24 decoder.
• Sampling frequencies higher than 48 kHz are sampled down to
48 kHz or lower and then sound field programs are applied.
Sound field programs
Selecting sound field programs
Notes
Summary of Contents for RX V1900 - AV Receiver
Page 133: ......
