RX-V1200/RX-V1200RDS/HTR-5490/RX-V2200
RX-V1200/RX-V1200RDS/
HTR-5490/RX-V2200
■
SELF DIAGNOSIS FUNCTION (DIAG)
There are 18 DIAG menu items, each of which has sub-menu items. Listed in the table below are menu items and sub-menu
items. (Some diagnostic functions do not apply to all models or to all markets.)
15
No DIAG menu
sub-menu
1
YSS938
1. ANALOG BYPASS
2. YSS 0dB
3. YSS FULL BIT
2
YSS-CS
1. YSS-CS 0dB
2. YSS-CS FULL BIT
3
CS-YSS
1. CS-YSS 0dB
2. CS-YSS FULL BIT
4
CS49329
1. CS49329 0dB
2. CS49329 FULL BIT
5
HP ROUTE
1. HP 0dB
2. HP FULL BIT
6
RAM THROUGH
1. RAM 0dB
2. MAIN ATT
7
DOLBY PRO
1. PRO LOGIC
I
LOGIC
2. PRO LOGIC
II
3. NEO: 6
8
SPEAKER SET
1. MAIN: SMALL 0dB
2. MAIN: LARGE -10dB
3. CENTER: NONE
4. LFE/BASS: MAIN
5. FRONT MIX: 5ch
6. REAR C: MUTE
7. REAR L/R: MUTE
9
EFFECT OFF/
1. VFD CHECK (Initial display)
DISPLAY CHECK
2. VFD DISP OFF (All segments OFF)
3. VFD DISP ALL (All segments ON 100%)
4. VFD DIMMER (All segments ON 50%)
5. CHECKED PATTERN (ON in lattice)
10 MANUAL TEST
1. TEST ALL
2. TEST MAIN L
3. TEST CENTER
4. TEST MAIN R
5. TEST REAR R
6. TEST REAR CENTER
7. TEST REAR L
8. TEST LFE
11 RS-232C
1. TX DATA
2. HARD FLOW
12 FACTORY PRESET
1. PRESET INHIBIT (memory initialization inhibited)
2. PRESET RESERVED (memory initialized)
13 AD DATA CHECK
1. DC/PS (protection)
/FAN TEST
2. THM/FAN OUT
3. REC-OUT
4. IMP SW/POWER LIMIT
5. K0/K1 (panel key)
6. FAN DRIVE TEST: HIGH (Fan test only applies to models with a fan.)
7. FAN DRIVE TEST: MID (Fan test only applies to models with a fan.)
8. FAN DRIVE TEST: LOW (Fan test only applies to models with a fan.)
