![Yamaha RX-V100D Service Manual Download Page 17](http://html.mh-extra.com/html/yamaha/rx-v100d/rx-v100d_service-manual_902343017.webp)
RX-V100D
17
RX-V100D
• Functions in DIAG mode
In addition to the DIAG menu items, functions as listed below are available.
• Input selection, 6CH input
• Center/Rear/Rear Center/Sub-woofer level adjustment
• Speaker relay control of A and B
• Muting
• Power on/off
• Master volume
* Functions related to the tuner and the set menu are not available.
* It is possible to confirm Menu No.14 IF STATUS while keeping the signal process (operation status) of each DIAG menu
by using the INPUT MODE key of the main unit.
• Initial settings used to start DIAG
The following settings are used when starting DIAG.
When DIAG is canceled, these settings are restored to those before starting DIAG.
• Master volume: -20 dB
• Input: DVD (MULTI CH INPUT OFF)
• Effect level: 0 dB
• Audio mute: OFF
• Speaker relay of A and B: ON
• Speaker setting: LARGE / BASS OUT = SWFR
• DIAG menu: BYPASS (1. ANALOG BYPASS)
• Operation procedure of DIAG menu and SUB-MENU
There are 21 MENU items, each of which has some SUB-MENU items.
DIAG menu selection
Main unit: Select the menu using the PROGRAM knob.
SUB-MENU selection
Main unit: Select the sub-menu using (Forward) and (Reverse) keys of PRESET/TUNING.
DIAG menu selection
Keys of main unit
Reverse
Forward
Reverse
Forward
SUB-MENU selection