background image

 

2

 

Introduction

 

Thank you for choosing a Yamaha NS-P240 or NS-P246 Home Cinema 5.1/6.1 Channel Speaker System. 
Each of these systems include the following speakers:

 

• NX-S120

 

The NX-S120 are full-range acoustic-suspension speakers. Each system includes two (2) front and two 
(2) surround speakers. In addition, the NS-P246 system includes an additional NX-S120 that serves as a 
surround back speaker.

 

• NX-C120

 

The NX-C120 is a full-range acoustic-suspension center speaker.

 

• SW-P240

 

The SW-P240 is a subwoofer that features a built-in power amplifier. It utilizes Advanced Yamaha Active 
Servo Technology to reproduce extremely high quality super-bass range sounds that add a rich, realistic 
dimension to your home theater. (Refer to page 9 for detailed information on Advanced Yamaha Active 
Servo Technology.)

 

Package contents

 

Please confirm that the following items are included in the package.

Front and surround speakers
(and surround back speaker in NS-P246)

Center speaker

Subwoofer

NX-S120

X 4 <NS-P240>
X 5 <NS-P246> 

NX-C120

SW-P240

Speaker cables

Subwoofer cable

Fasteners
(for NX-C120)

Non-skid pads 
(for NX-S120)

Non-skid pads 
(for SW-P240)

X 2

[4m]

<NS-P240> 

<NS-P246> 

X 2 <NS-P240> 
X 3 <NS-P246> 

[15m] 

X 3

Mounting brackets

X 4 <NS-P240> 
X 5 <NS-P246> 

Screws for mounting 
brackets

X 4 <NS-P240> 
X 5 <NS-P246> 

NSP240,246̲U.book Page 2 Wednesday, October 22, 2003 3:29 PM

Summary of Contents for RX-SL80














































































Reviews: