Yamaha RX-S601 Owner'S Manual Download Page 81

Page: 81 / 131

■

Input Select (Input)

Switches the input source. Press ENTER to switch to the selected input source.

Choices

HDMI 1–6, AUDIO 1–3, AV 1–3, TUNER, USB, SERVER, NET RADIO, Airplay, (network
sources), Bluetooth, AUX

■

Tone Control (Tone Control)

Adjusts the high-frequency range (Treble) and low-frequency range (Bass) of sounds.

Choices

Treble (Treble), Bass (Bass)

Setting range

-6.0 dB to Bypass (Bypass) to +6.0 dB (0.5 dB increments)

• If you set an extreme value, sounds may not match those from other channels.

■

DSP/Surround (DSP/Surround)

Configures the sound field program and surround settings.

❑

DSP Level (DSP Level)

Adjusts the sound field effect level.

Setting range

-6 dB to 0 dB to +3 dB

❑

Adaptive DRC (A.DRC)

Sets whether the dynamic range (from maximum to minimum) is automatically adjusted
when the volume level is adjusted. When it is set to “On”, it is useful for listening to
playback at a low volume at night.

Settings

If “On” is selected, the dynamic range becomes narrow at a low volume and wide at a
high volume.

❑

Enhancer (Enhancer)

Enables/disables Compressed Music Enhancer (p.47).

• This setting is applied separately to each input source.

• You can also use ENHANCER on the remote control to enable/disable Compressed Music Enhancer

(p.47).

Settings

Default

TUNER, USB, SERVER, NET RADIO, AirPlay, (network sources), Bluetooth: On (On)

Others: Off (Off)

Repeat (Repeat)

Configures the repeat setting for the iPod (p.63),
USB storage device (p.68), or media server (p.71).

—

Shuffle (Shuffle)

Configures the shuffle setting for the iPod (p.63),
USB storage device (p.68), or media server (p.71).

—

Volume Interlock (Interlock)

Enables/disables volume controls from iTunes/iPod
via AirPlay.

Bookmark On (Bookmark On)
Bookmark Off (Bookmark Off)

Adds your favorite Internet radio station to the
“Bookmarks” folder, or removes it from the
“Bookmarks” folder.

Init Scan (Init Scan)

(RX-S601D only)
Performs an initial scan for DAB radio reception.

Tune Aid (Tune Aid)

(RX-S601D only)
Checks reception strength of each DAB channel.

Item

Function

Page

On (On)

Automatically adjusts the dynamic range.

Off (Off)

The dynamic range is not automatically adjusted.

Off (Off)

Disables Compressed Music Enhancer.

On (On)

Enables Compressed Music Enhancer.

Summary of Contents for RX-S601




































































































































Search results

Summary of Contents for RX-S601

Reviews:

Related manuals for RX-S601

Brands by name

Popular brands

Yamaha RX-S601, Owner'S Manual

Search results

Summary of Contents for RX-S601

Reviews:

Related manuals for RX-S601

Brands by name

Popular brands