Yamaha RX-N600, Service Manual

Page: 61 / 142

RX-N600/RX-N600D/HTR-N5060/
DSP-N600
61
RX-N600/RX-N600D/
HTR-N5060/DSP-N600
No. Name I/O Function
1 RXOUT O Input bi-phase selection data output pin
2 RX0 Is TTL-compatible digital data input pin
3 RX1 I Coaxial-compatible digital data input pin with built-in amplifier
4 RX2 Is TTL-compatible digital data input pin
5 RX3 Is TTL-compatible digital data input pin
6 DGND Digital GND
7 DVDD Digital power supply
8 RX4 Is TTL-compatible digital data input pin
9 RX5/VI Is TTL-compatible digital data / Validity flag input pin for modulation
10 RX6/UI Is TTL-compatible digital data / User data input pin for modulation
11 DVDD PLL digital power supply
12 DGND PLL digital GND
13 LPF O PLL loop filter connection pin
14 ACDD PLL analog power supply
15 AGND PLL analog GND
16 RMCK O R system clock output pin (256fs, 512fs, XIN, VCO)
17 RBCK O/I R bit clock input/output pin
18 DGND Digital GND
19 DVDD Digital power supply
20 RLRCK O/I R LR clock input/output pin (fs)
21 RDATA O Serial audio data input pin
22 SBCK O S bit clock output pin (32fs, 64fs, 128fs)
23 SLRCK O S LR clock output pin (fs/s, fs, 2fs)
24 SDIN Is Serial audio data input pin
25 DGND Digital GND
26 DVDD Digital power supply
27 XMCK O Oscillation amplifier output pin
28 XOUT O Crystal resonator connection output pin
29 XIN I Crystal resonator connection, external supply clock input pin (24.576 MHz or 12.288 MHz)
30 DVDD Digital power supply
31 DGND Digital GND
32 EMPHA/UO I/O Emphasis information / U data output / Chip address setting pin
33 AUDIO/VO I/O Non-PCM output / V flag output / Chip address setting pin
34 CKST I/O Clock switch transition period signal / Demodulation master or slave function switch pin
35 INT I/O Microcontroller interrupt output / Modulation or general-purpose I/O switch pin
36 RERR O PLL clock error, data error flag output
37 DO O Microcontroller I/F read data output pin (3-state)
38 DI Is Microcontroller I/F write data input pin
39 CE Is Microcontroller I/F chip enable input pin
40 CL Is Microcontroller I/F clock input pin
41 XMODE Is System reset input pin
42 DGND Digital GND
43 DVDD Digital power supply
44 TMCK/PIO0 I/O Modulation 256fs system clock input / General-purpose I/O input/output pin
45 TMCK/PIO1 I/O Modulation 64fs bit clock input / General-purpose I/O input/output pin
46 TLRCK/PIO2 I/O Modulation fs clock input / General-purpose I/O input/output pin
47 TLRCK/PIO3 I/O Modulation serial audio data input / General-purpose I/O input/output pin
48 TXO/PIOEN O/I Modulation data output / General-purpose I/O enable input pin
1) Input/output I or O = -0.3 to 3.6V, Is = -0.3 to 5.5V
2) Pins 32 and 33 are latch address setting input pins when pin 41 = "L".
3) Pin 34 is a demodulation function master or slave setting input pin when pin 41 = "L".
4) Pin 35 is a modulation function or general-purpose I/O function switch setting input pin when pin 41 = "L".
5) Perform ON/OFF for all power supplies with the same timing as a latch-up countermeasure.
IC56 : LC89057W-VF4-E (DSP P.C.B)
Digital Audio Interface Transceiver