E-3
English
STANDBY/ON
PHONES
DISPLAY
+
-
+
-
R
L
MEMORY
AUTO/MAN'L
TIME ADJ
TIMER
HOUR
MIN
BASS
TREBLE
BALANCE
MAX
MIN
VOLUME
INPUT
PRESET/TUNING
PRESET/BAND
NATURAL SOUND STEREO RECEIVER RX-E100
30
°
30
°
Battery replacement
If you find that the remote control must be used closer to
the main unit than usual, the batteries are weak. Replace
batteries with new ones.
Remote control
sensor
The remote control
This remote control controls a whole system: not only
RX-E100 but also CDX-E100. Moreover, a cassette deck
(KX-E100) and MD recorder (MDX-E100) that level up
your system can be operated by it. Operating buttons for
each unit are explained on the pages below:
Receiver, RX-E100:
p.7
CD player, CDX-E100:
p.18
Cassette deck, KX-E100:
p.23
MD recorder, MDX-E100:
p.23
Loading the batteries for the remote control
1
Remove the battery compartment cover.
2
Insert 4 batteries into the battery compartment.
3
Replace the battery compartment cover.
Remote control operation range
Notes
• There should be no large obstacles between the remote control
and the main unit.
• If the remote control sensor is directly illuminated by strong
lighting (especially an inverter type of fluorescent lamp, etc.),
it might cause the remote control not to work correctly. In this
case, reposition the main unit to avoid direct lighting.
Within approximately
6 m (20 feet)
GETTING STARTED
Notes
• Use only AAA, UM-4, R03 batteries for replacement.
• Be sure the polarities are correct. (See the illustration inside
the battery compartment.)
• Remove the batteries if the remote control will not be used for
an extended period of time.
• If batteries leak, dispose of them immediately. Avoid touching
the leaked material or letting it come in contact with clothing,
etc. Clean the battery compartment thoroughly before
installing new batteries.
